Explanation of machine data and setting data
2.1
Data in the list
The machine data and the setting data are listed in form of tables shown below:
MD number
Identifier
Units
Name
Attributes
System
Dimension
Expanded table
The expanded table includes data from the standard table plus additional rows with system-
specific values.
MD number
Identifier
Units
Name
Attributes
-
Dimension
<System 1>
-
<System 2>
-
A dash "-" in a field means that the same value as for <System 1> applies for the specified
system.
The entry "-/-" in the "Protection" field means that the machine data is not available for the
specified system.
Example:
10881
MM_EXTERN_GCODE_SYSTEM
-
ISO_3 Mode: GCodeSystem
-
808d-me42
-
808d-me62
-
808d-te42
-
808d-te62
-
MD number and identifier
MD and SD are addressed via their numbers or their names (identifiers). The number and the
name, as well as the activation type and the unit are displayed on the screen of the control
system.
In the field "identifier", you can see the name of the data.
Parameter Manual
List Manual, 01/2017
Default value
Minimum value
Default value
Default value
-
0
0
1
1
Display filter
Data type
Maximum value
Display filter
Data type
Minimum value
Maximum value
-
-
-
-
N01, N12
DWORD
0
2
0
2
0
2
0
2
2
Reference
Activation
Protection
Class
Reference
Activation
Protection
-/-
-1/-
FBF A
Power On
0/0
S
0/0
S
1/1
M
1/1
M
11