Siemens SINUMERIK 808D Parameter Manual page 64

Machine data
3.2 General machine data
Value
Value
Value
The machine data can only be written with values 0 and 1, and with the corresponding
password also active.
11171 ACCESS_WRITE_MACCESS
- Write protection for _N_MACCESS_DEF
-
- -
Description:
Set write protection for definition file /_N_DEF_DIR/_N_MACCESS_DEF:
Value
Value
Value
Value
Value
Value
Value
Value
The machine data can only be written with values 0 and 1, and with the corresponding
password also active.
11172 ACCESS_WRITE_UACCESS
- Write protection for _N_UACCESS_DEF
-
- -
Description:
Set write protection for definition file /_N_DEF_DIR/_N_UACCESS_DEF:
Value
Value
Value
Value
Value
Value
Value
Value
The machine data can only be written with values 0, 1 and 2, and with the
corresponding password also active.
11210 UPLOAD_MD_CHANGES_ONLY
- Machine data backup of changed machine data only
-
- -
Description:
Either all data or only those data which differ from the default setting can be set to
be output when creating standard archives (ARC) and copying 'NC active data'.
Bit0(LSB)
0: All data are output
1: Only those MDs that have changed in comparison to the compiled values are output
Bit1 is reserved and acts like bit 0
Bit2 Change to an array element
0: Complete arrays are output
64
5: Keyswitch position 2
6: Keyswitch position 1
7: Keyswitch position 0
7
0: Siemens password
1: Machine OEM password
2: Password of setup engineer, service
3: End user password
4: Keyswitch position 3
5: Keyswitch position 2
6: Keyswitch position 1
7: Keyswitch position 0
7
0: Siemens password
1: Machine OEM password
2: Password of setup engineer, service
3: End user password
4: Keyswitch position 3
5: Keyswitch position 2
6: Keyswitch position 1
7: Keyswitch position 0
0x0F
Effectiveness of the differential upload with INI/TEA files
N01
BYTE
0 7
N01
BYTE
0 7
N01, N05
BYTE
0 -
-
PowerOn
2/2 M
-
PowerOn
3/3 U
-
Immediately
2/2 M
Parameter Manual
List Manual, 01/2017