Siemens SINUMERIK 808D Parameter Manual page 167

808d-te62 5
808d-mte40 5
808d-mte60 5
Description:
Switch on of curve and torsion smoothing.
Smoothing of the curve or torsion causes a homogenous path velocity.
Smoothing is only performed, when the relevant factor is MD 20605
$MC_PREPDYN_SMOOTHING_FACTOR > 0.
There is an entry for all dynamic G code groups.
20620 HANDWH_GEOAX_MAX_INCR_SIZE
mm Limitation handwheel increment for geometry axes
-
- -
Description:
> 0: Limitation of the size of the selected increment for geometry axes
MD 11330 $MN_JOG_INCR_SIZE0[<increment/VDI signal>] or
SD41010 $SN_JOG_VAR_INCR_SIZE for geometry axes
0: No limitation on geometry axes
20622 HANDWH_GEOAX_MAX_INCR_VSIZE
mm/min Path velocity override
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
The following applies to the velocity override of the path:
> 0: Limitation of the size of the selected increment
(MD11330 $MN_JOG_INCR_SIZE_[<increment/VDI signal>] or
SD41010 $SN_JOG_VAR_INCR_SIZE) / 1000*IPO sampling time
= 0: No limitation
Parameter Manual
List Manual, 01/2017
0, 0, 0, 0, 0, 0, 0, 0, 0, 0
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0...
0, 0, 0, 0, 0, 0, 0, 0, 0, 0
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0...
0, 0, 0, 0, 0, 0, 0, 0, 0, 0
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0...
0.0, 0.0, 0.0, 0.0, 0.0, 0.0
0.0, 0.0, 0.0...
500., 500., 500., 500., 0.0
500., 500., 500., 500....
500., 500., 500., 500., 0.0
500., 500., 500., 500....
500., 500., 500., 500., 0.0
500., 500., 500., 500....
500., 500., 500., 500., 0.0
500., 500., 500., 500....
500., 500., 500., 500., 0.0
500., 500., 500., 500....
500., 500., 500., 500., 0.0
500., 500., 500., 500....
3.3 Channel-specific machine data
- 0/0
- 7/2
- 7/2
C08, C06 H1
DOUBLE PowerOn
- 1/1
C08, C06, C05 -
DOUBLE PowerOn
- 0/0
- 0/0
- 0/0
- 0/0
- 7/2
- 7/2
Machine data
S
M
M
M
S
S
S
S
M
M
167