Siemens SINUMERIK 808D Parameter Manual page 365

43235 SPIND_USER_VELO_LIMIT
rev/min Maximum spindle speed
-
- -
Description:
The user can enter a maximum spindle speed.
The NCK limits an excessive spindle setpoint speed to this value. The SD is effective
immediately.
Corresponds with:
MD35100 $MA_SPIND_VELO_LIMIT (maximum spindle speed)
MD35110 $MA_GEAR_STEP_MAX_VELO (maxmum speed for gear stage change)
43240 M19_SPOS
degrees Spindle position for spindle positioning with M19.
-
- -
Description:
Spindle position in [ DEGREES ] for spindle positioning with M19.
The position approach mode is defined in SD43250 $SA_M19_SPOSMODE.
Default positions must lie in the range 0 <= pos < MD30330 $MA_MODULO_RANGE.
Path defaults (SD43250 $SA_M19_SPOSMODE = 2) can be positive or negative and are only
limited by the input format.
43250 M19_SPOSMODE
- Spindle position approach mode for spindle positioning with M19. DWORD
-
- -
Description:
Spindle position approach mode for spindle positioning with M19.
In which signify:
0:
1:
2:
3:
4:
5:
43300 ASSIGN_FEED_PER_REV_SOURCE
- Revolutional feedrate for positioning axes/spindles
CTEQ
- -
Description:
0=
>0=
feedrate is derived.
-1=
which the axis/spindle is active
-3=
which the axis/spindle is active. No revolutional feedrate is active if the master
spindle is at a standstill.
Parameter Manual
List Manual, 01/2017
SD43230 $SA_SPIND_MAX_VELO_LIMS (programmed spindle speed limit with G96/961)
MD10709 $MN_PROG_SD_POWERON_INIT_TAB
MD10710 $MN_PROG_SD_RESET_SAVE_TAB
1.0e+8
0.0
0
DC (default) approach position on the shortest path.
AC approach position normally.
IC approach incrementally (as path), sign gives the traversing direction
DC approach position on the shortest path.
ACP approach position from the positive direction.
ACN approach position from the negative direction.
0
No revolutional feedrate is active.
Machine axis index of the rotary axis/spindle, from which the revolutional
The revolutional feedrate is derived from the master spindle of the channel in
The revolutional feedrate is derived from the master spindle of the channel in
A06
DOUBLE
0.0 -
, A12
DOUBLE
-10000000.0 10000000.0
, A12
0 5
-
DWORD
-3 31
NC setting data
S1, Z1
Immediately
7/7 U
S1
Immediately
7/7 U
S1
Immediately
7/7 U
V1, P2, S1
Immediately
1/1 M
365