Siemens SINUMERIK 808D Parameter Manual page 345

808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
Override used to multiply the feed at the corner with G62.
42526 CORNER_SLOWDOWN_CRIT
degrees Corner detection at G62
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
Angle from which a corner is taken into account when reducing the feed with G62.
For example SD42526 $SC_CORNER_SLOWDOWN_CRIT = 90 means that all corners of 90 degrees
or a more acute angle are traversed slower with G62.
42528 CUTCOM_DECEL_LIMIT
- Feed lowering on circles with tool radius compensation
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
The setting data limits feed lowering of the tool center point on concave circle
segments with tool radius compensation active and CFC or CFIN selected.
With CFC, the feed is defined at the contour. On concave circular arcs, feed lowering
of the tool center point is created by the ratio of the contour curvature to the tool
center point path curvature. The setting data is limiting this effect, reducing
backing off and overheating of the tool.
For contours with varying curvatures, a mid-range curvature is used.
Parameter Manual
List Manual, 01/2017
0., 0., 0., 0., 0., 0., 0., 0.0
0....
0., 0., 0., 0., 0., 0., 0., 0.0
0....
0., 0., 0., 0., 0., 0., 0., 0.0
0....
0., 0., 0., 0., 0., 0., 0., 0.0
0....
0., 0., 0., 0., 0., 0., 0., 0.0
0....
0., 0., 0., 0., 0., 0., 0., 0.0
0....
0., 0., 0., 0., 0., 0., 0., 0.0
0....
0., 0., 0., 0., 0., 0., 0., 0.0
0....
0., 0., 0., 0., 0., 0., 0., 0.0
0....
0., 0., 0., 0., 0., 0., 0., 0.0
0....
0., 0., 0., 0., 0., 0., 0., 0.0
0....
0., 0., 0., 0., 0., 0., 0., 0.
0....
0., 0., 0., 0., 0., 0., 0., 0.
0....
0., 0., 0., 0., 0., 0., 0., 0.
0....
0., 0., 0., 0., 0., 0., 0., 0.
0....
0., 0., 0., 0., 0., 0., 0., 0.
0....
0., 0., 0., 0., 0., 0., 0., 0.
0....
- 1/1
- 1/1
- 1/1
- 7/7
- 7/7
- -
DOUBLE Immediately
- 1/1
- 1/1
- 1/1
- 1/1
- 7/7
- 7/7
- -
DOUBLE Immediately
1. 1/1
1. 1/1
1. 1/1
1. 1/1
1. 7/7
1. 7/7
NC setting data
M
M
M
U
U
M
M
M
M
U
U
M
M
M
M
U
U
345