Siemens SINUMERIK 808D Parameter Manual page 208

Machine data
3.3 Channel-specific machine data
Further significance of bits 9-11 only when bit 8 =1 and $AC_REQUIRED_PARTS > 0:
Bit 9 = 0:
Bit 9 = 1:
from MD PART_COUNTER_MCODE[1]
Bit 10 = 0:
Bit 10 = 1:
Bit 11 = 1:
Bit 12 - 15:
-------------------------------------------------------------------------
Bit 12 = 1:
Further significance of bits 13-15 only when bit 12 =1 and $AC_REQUIRED_PARTS > 0:
Bit 13 = 0:
M30
Bit 13 = 1:
command from MD PART_COUNTER_MCODE[2]
Bit 14 = 0:
Bit 14 = 1:
Bit 15 = 1:
Bit 16 - 19:
-------------------------------------------------------------------------
Meaning of the bits 16-19 applies only if Bit4 =1 and $AC_REQUIRED_PARTS > 0:
Bit 16 = 0:
Bit 16 = 1:
Bit 17
Bit 18
Bit 19
Bit 20 - 23:
-------------------------------------------------------------------------
Meaning of bits 20-23 only if bit8 =1 and $AC_REQUIRED_PARTS > 0:
Bit 20 = 0:
Bit 20 = 1:
Bit 21
Bit 22
Bit 23
Bit 24 - 27:
-------------------------------------------------------------------------
Meaning of bits 24-27 only if bit12 =1 and $AC_REQUIRED_PARTS > 0:
Bit 24 = 0:
Bit 24 = 1:
Bit 25
Bit 26
Bit 27
Related to:
MD27882 $MC_PART_COUNTER_MCODE
208
Counter $AC_ACTUAL_PARTS is incremented by 1 with a VDI output of M02/M30
Counter $AC_ACTUAL_PARTS is incremented by 1 with output of the M command
$AC_ACTUAL_PARTS also active with program test/block search
No machining $AC_ACTUAL_PARTS with program test/block search
Counter $AC_ACTUAL_PARTS is incremented by 1 on a return with GOTOS
Activating $AC_SPECIAL_PARTS
Counter $AC_SPECIAL_PARTS is active
Counter $AC_SPECIAL_PARTS is incremented by 1 with a VDI output of M02/
Counter $AC_SPECIAL_PARTS is incremented by 1 with output of the M
$AC_SPECIAL_PARTS also active with program test/block search
No machining $AC_SPECIAL_PARTS with program test/block search
Counter $AC_SPECIAL_PARTS is incremented by 1 on a return with GOTOS
Extension $AC_TOTAL_PARTS
$AC_TOTAL_PARTS is active in MDI mode
No machining $AC_TOTAL_PARTS in MDI mode
Reserved!
Reserved!
Reserved!
Extension $AC_ACTUAL_PARTS
$AC_ACTUAL_PARTS is active in MDI mode
No machining $AC_ACTUAL_PARTS in MDI mode
Reserved!
Reserved!
Reserved!
Extension $AC_SPECIAL_PARTS
$AC_SPECIAL_PARTS is active in MDI mode
No machining $AC_SPECIAL_PARTS in MDI mode
Reserved!
Reserved!
Reserved!
Parameter Manual
List Manual, 01/2017