Siemens SINUMERIK 808D Parameter Manual page 93

On the first NCK power-up or cold restart of the control (=deletion of user data)
MD18230 $MN_MM_USER_MEM_BUFFERED is set by the NCK software so that at least the
default value results for MD18060 $MN_INFO_FREE_MEM_STATIC.
Machine data for configuration of functions that require nonvolatile memory (tools,
GUDs, compensations, ...) can be increased until this memory has all been allocated.
18082 MM_NUM_TOOL
- Number of tools the NCK can manage (SRAM)
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
The NC cannot manage more tools than the number entered in the MD. A tool has at least
one cutting edge.
Buffered user memory is used.
The maximum possible number of tools is equal to the number of cutting edges. The MD
must also be set when TOOLMAN is not used.
The buffered data are lost when the machine data is changed.
Related to:
18094 MM_NUM_CC_TDA_PARAM
- Number of OEM tool data (SRAM)
-
- -
Description:
Number of tool-specific data (of type Integer) which can be created per tool, and which
are available to the user or the compile cycle.
This machine data increases the buffered memory requirement by sizeof(double)*max.
number of tools.
Related to:
MD18080 $MN_MM_TOOL_MANAGEMENT_MASK
MD18082 $MN_MM_NUM_TOOL
18095 MM_TYPE_CC_TDA_PARAM
- Type of OEM tool data (SRAM)
-
808d-me42 64
808d-me62 64
808d-te42 64
808d-te62 64
808d-mte40 64
808d-mte60 64
Description:
Individual types can be assigned to the parameters in this way. The array index n can
accept values from 0 to the value of MD18094 $MN_MM_NUM_CC_TDA_PARAM.
The possible values of the MD = 1, 2, 3, 4, 5 and 6 represent the NC language types
1
2
3
Parameter Manual
List Manual, 01/2017
64
64
64
64
-
-
0
1, 1, 1, 1, 1, 1, 1, 1...
1, 1, 1, 1, 1, 1, 1, 1...
1, 1, 1, 1, 1, 1, 1, 1...
1, 1, 1, 1, 1, 1, 1, 1...
4, 4, 4, 4, 4, 4, 4, 4...
4, 4, 4, 4, 4, 4, 4, 4...
BOOL,
CHAR,
INT,
N02, N09
DWORD
0 64
0 64
0 64
0 64
0 128
0 128
N02, N09
DWORD
0 64
N02, N09
DWORD
1 1
1 1
1 1
1 1
1 6
1 6
Machine data
3.2 General machine data
FBWsl, S7
PowerOn
ReadOnly S
ReadOnly S
ReadOnly S
ReadOnly S
ReadOnly S
ReadOnly S
H2
PowerOn
2/2 M
-
PowerOn
ReadOnly M
ReadOnly M
ReadOnly M
ReadOnly M
2/2 M
2/2 M
93