Siemens SINUMERIK 808D Parameter Manual page 127

20110 RESET_MODE_MASK
- Definition of basic control settings after reset/PP end
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
Definition of the initial setting of the control after ramp-up and at reset/end-of-
part-program with regard to the G codes (in particular the active plane and the
settable work offset), tool length offset and transformation by setting the following
bits:
Bit 0: Reset mode
Bit 1: Suppress aux. funct. output on tool selection
Bit 2: Select reset response after power-on (e.g. tool offset)
Bit 3: Select reset response after end of test mode with regard to active tool offsets.
Bit 4: Reserved
Bit 5: Reserved
Bit 6: Reset response "Active tool length offset"
Bit 7: Reset response "Active kinematic transformation"
Bit 8: Reset response "Coupled-motion axes"
Bit 9: Reset response "Tangential correction"
Bit 10: Reset response "Synchronous spindle"
Bit 11: Reset response "Revolutional feedrate"
Bit 12: Reset response "Geo axis replacement"
Bit 13: Reset response "Master value coupling"
Bit 14: Reset response "Basis frame"
Bit 15: Reset response "Electronic gearbox"
Bit 16: Reset response "Master spindle"
Bit 17: Reset response "Master toolholder"
Bit 18: Reset response "Reference axis for G96/G961/G962"
Bit 19: Reserved "Adjustable software limit switch ineffective"
Bit 20: Reset response "$P_USEKT"
Bits 4 to 11, 16 and 17 are only evaluated for bit 0 = 1.
Meaning of the individual bits:
Parameter Manual
List Manual, 01/2017
0x4045, 0x4045, 0
0x4045, 0x4045,
0x4045, 0x4045,
0x4045, 0x4045...
0x4045, 0x4045, 0
0x4045, 0x4045,
0x4045, 0x4045,
0x4045, 0x4045...
0x4045, 0x4045, 0
0x4045, 0x4045,
0x4045, 0x4045,
0x4045, 0x4045...
0x4045, 0x4045, 0
0x4045, 0x4045,
0x4045, 0x4045,
0x4045, 0x4045...
0x1, 0x1, 0x1, 0x1, 0
0x1, 0x1, 0x1, 0x1...
0x1, 0x1, 0x1, 0x1, 0
0x1, 0x1, 0x1, 0x1...
3.3 Channel-specific machine data
C11, C03 F2, K6, M3, TE4, W5, B3, K5,
M1, G2, K1, K2, P1, S1, W1, 2.4,
2.7
DWORD Reset
0x17FFFF 1/1
0x17FFFF 1/1
0x17FFFF 1/1
0x17FFFF 1/1
0x17FFFF 1/1
0x17FFFF 1/1
Machine data
M
M
M
M
M
M
127