Siemens SINUMERIK 808D Parameter Manual page 218

Machine data
3.3 Channel-specific machine data
28302 MM_PROTOC_NUM_ETP_STD_TYP
- Number of standard event types ETP
-
- 10
Description:
Number of standard event types required in the ETP OPI block.
28400 MM_ABSBLOCK
- Activate basic blocks with absolute values
-
- -
Description:
Value:
0:
1:
A display buffer of the following size is created:
(MD28257 $MC_MM_BUFFERED_AC_MARKER + MD28070 $MC_MM_NUM_BLOCKS_IN_PREP)
>= 128:
28402 MM_ABSBLOCK_BUFFER_CONF
- Setting of upload buffer size
-
- 2
Description:
Dimensioning the size of the upload buffer:
MD28402 $MC_MM_ABSBLOCK_BUFFER_CONF[0] : Number of blocks before the current block
MD28402 $MC_MM_ABSBLOCK_BUFFER_CONF[1] : Number of blocks after the current block
The machine data is tested for the following upper / lower limits during startup:
0 <= MD28402 $MC_MM_ABSBLOCK_BUFFER_CONF[0] <= 8
Alarm 4152 is issued when the limits are violated.
28520 MM_MAX_AXISPOLY_PER_BLOCK
- Maximal number of axial polynomials per block
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
Maximum number of axis polynomials which can be contained in a block.
In the standard case, each block contains only one polynomial per axis, i.e. this data
can be set to 1 immediately.
More polynomials are required in the following cases:
This data must have a value of at least 3 for smoothing with G642 to G645.
A value of 5 is recommended if COMPCAD (Advanced Surface) is used.
A value of 15 is recommended if COMPSURF is used.
218
28, 6, 0, 0, 0, 20, 20,
20, 0, 3, 28, 6, 0, 0, 0,
20, 20, 20, 0,...
0, 0, 0, 0, 0, 0, 0, 0...
Basic blocks with absolute values deactivated.
Basic blocks with absolute values activated;
Basic blocks with absolute values activated.
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0...
1
3, 3, 3, 3, 3, 3, 3, 3...
1
1
3, 3, 3, 3, 3, 3, 3, 3...
3, 3, 3, 3, 3, 3, 3, 3...
C02
DWORD
28, 6, 0, 0, 0, 20, 61, 61, 61, 61,
20, 20... 61, 61, 61, 61...
EXP, C02
DWORD
0 512
EXP, C02
DWORD
0 32000
C02
DWORD
1 15
1 15
1 15
1 15
1 15
1 15
-
PowerOn
1/1 M
K1
PowerOn
2/2 M
* 256 bytes
K1
PowerOn
2/2 M
B1
PowerOn
0/0 S
1/1 M
0/0 S
0/0 S
0/0 S
0/0 S
Parameter Manual
List Manual, 01/2017