Siemens SINUMERIK 808D Parameter Manual page 207

Bits 8 only when bit 1 = 1
Bit 8 = 0
Bit 8 = 1
$AC_CYCLE_TIME is deleted on jumping to program start with GOTOS.
Bit 9 only when bits 0, 1 = 1:
Bit 9 = 0
Bit 9 = 1
$AC_OPERATING_TIME, $AC_CYCLE_TIME: Measurement also with override = 0.
Bits 10 to 31
Reserved
27880 PART_COUNTER
- Activation of workpiece counter
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
The part counters can be configured with this machine data.
Note: with bit 0 = 1 and $AC_REQUIRED_PARTS less than 0, all workpiece counts
activated in this MD are frozen at the status reached.
Meaning of the individual bits:
Bits 0 - 3:
------------------------------------------------------------------------
Bit 0 = 1:
Further meaning of bits 1-3 only when bit 0 =1 and $AC_REQUIRED_PARTS > 0:
Bit 1 = 0:
Bit 1 = 1:
Bit 2
Bit 3
Bits 4 - 7:
-------------------------------------------------------------------------
Bit 4 = 1:
Further meaning of bits 5-7 only when bit 4 =1 and $AC_REQUIRED_PARTS > 0:
Bit 5 = 0:
Bit 5 = 1:
from MD PART_COUNTER_MCODE[0]
Bit 6 = 0:
Bit 6 = 1:
Bit 7 = 1:
Bits 8 - 11:
-------------------------------------------------------------------------
Bit 8 = 1:
Parameter Manual
List Manual, 01/2017
$AC_CYCLE_TIME is not deleted on jumping to program start with GOTOS
$AC_OPERATING_TIME, $AC_CYCLE_TIME: No measurement with override = 0.
0x901
0x901
0x901
0x901
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0...
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0...
Activating $AC_REQUIRED_PARTS
Counter $AC_REQUIRED_PARTS is activated
Alarm/VDI output if $AC_ACTUAL_PARTS corresponds to $AC_REQUIRED_PARTS
Alarm/VDI output if $AC_SPECIAL_PARTS corresponds to $AC_REQUIRED_PARTS
Reserved!
Reserved!
Activating $AC_TOTAL_PARTS
Counter $AC_TOTAL_PARTS is active
Counter $AC_TOTAL_PARTS is incremented by 1 with a VDI output of M02/M30
Counter $AC_TOTAL_PARTS is incremented by 1 with output of the M command
$AC_TOTAL_PARTS also active with program test/block search
No machining $AC_TOTAL_PARTS with program test/block search
Counter $AC_TOTAL_PARTS is incremented by 1 on a return with GOTOS
Activating $AC_ACTUAL_PARTS
Counter $AC_ACTUAL_PARTS is active
3.3 Channel-specific machine data
C09
DWORD
0 0x0FFFFFFF
0 0x0FFFFFFF
0 0x0FFFFFFF
0 0x0FFFFFFF
0 0x0FFFFFFF
0 0x0FFFFFFF
Machine data
K1
Reset
1/1 M
1/1 M
1/1 M
1/1 M
7/2 M
7/2 M
207