Siemens SINUMERIK 808D Parameter Manual page 151

:= 1
MD_SLMAXCUTTINGEDGENUMBER
No. of cutting edge (MD_SLMAXCUTTINGEDGENUMBER=9 is valid up to P4)
:= -1
Cutting edge number of old tool also applies to new tool.
:= -2
Cutting edge (correction) of old tool remains active until D is programmed. This means
that the old tool remains the active tool until D is programmed. In other words, the
tool on the spindle remains the programmed tool until D is programmed.
Example:
MD20270 $MC_CUTTING_EDGE_DEFAULT = 1;
After a tool change, the first cutting edge is active if no other cutting edge has been
programmed.
20272 SUMCORR_DEFAULT
- Initial position resulting offset without program
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
The number of the total offset of the cutting edge which becomes active when a new
cutting edge compensation is activated without a programmed DL value being available.
MD18110 $MN_MM_MAX_SUMCORR_PER_CUTTEDGE
defines the maximum useful value which can be entered.
Value
> 0
= 0
= 1
Related to:
MD20270 $MC_CUTTING_EDGE_DEFAULT.
20320 TOOL_TIME_MONITOR_MASK
- Time monitoring for tool in tool holder
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
Activation of the tool time monitoring for the tool holders and spindles 1..x.
Parameter Manual
List Manual, 01/2017
0, 0, 0, 0, 0, 0, 0, 0...
0, 0, 0, 0, 0, 0, 0, 0...
0, 0, 0, 0, 0, 0, 0, 0...
0, 0, 0, 0, 0, 0, 0, 0...
0, 0, 0, 0, 0, 0, 0, 0...
0, 0, 0, 0, 0, 0, 0, 0...
Meaning
Number of the total offset
No total offset active with D programming
The total offset number for the previously programmed D is used.
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0...
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0...
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0...
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0...
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0...
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0...
3.3 Channel-specific machine data
C03
DWORD
-1 6
-1 6
-1 6
-1 6
-1 6
-1 6
C06, C09
DWORD
0 0x7FFFFFFF
0 0x7FFFFFFF
0 0x7FFFFFFF
0 0x7FFFFFFF
0 0x7FFFFFFF
0 0x7FFFFFFF
Machine data
H2, W1
PowerOn
ReadOnly M
ReadOnly M
ReadOnly M
ReadOnly M
7/2 M
7/2 M
-
PowerOn
ReadOnly M
ReadOnly M
ReadOnly M
ReadOnly M
7/2 M
7/2 M
151