Siemens SINUMERIK 808D Parameter Manual page 105

●
NC part programs
●
R variables
●
Global user data (GUD)
●
Definitions of the protection zones
●
Correction tables EEC, CEC, QEC
●
Tool / magazine data
This data is retained after control power-off.
(Provided the data backup (battery,...) is in good working order, i.e. the Init switch
is correctly set on the control).
This means that they are available unchanged after restart.
Each additional active channel occupies some nonvolatile memory. With channel
activation, the value of the MD is automatically increased accordingly; the value of
MD18060 $MN_INFO_FREE_MEM_STATIC is retained if possible.
To enlarge this user memory further, MD19250 $ON_USER_MEM_BUFFERED must be increased.
The available values depend on the hardware and software configurations.
Information alarms 6030, 6035 can indicate that the desired total memory may not be
available on the model or on the hardware. See also MD11415 $MN_SUPPRESS_ALARM_MASK_2,
bit 22
See also the meaning of MD18060 $MN_INFO_FREE_MEM_STATIC
18321 MM_NUM_SYSTEM_FILES_IN_FS
- Number of system files
-
808d-me42 2
808d-me62 2
808d-te42 2
808d-te62 2
808d-mte40 2
808d-mte60 2
Description:
Index 0: Number of temporary system files in the passive file system (see also MD18355
$MN_MM_T_FILE_MEM_SIZE);
Index 1: Number of temporary Siemens cycles in the passive file system (see also
MD18354 $MN_MM_S_FILE_MEM_SIZE):
requested by the Siemens cycles.
18342 MM_CEC_MAX_POINTS
- Max. number of interpolation points on sag compensation (SRAM) DWORD
-
808d-me42 6
808d-me62 8
808d-te42 6
808d-te62 8
Parameter Manual
List Manual, 01/2017
...
300, 0
300, 0
300, 0
300, 0
500, 0
500, 0
e.g.: system traces
The data can be written, but will be overwritten during the runup by the value
128, 128, 128, 128,
128, 128, 0, 0
128, 128, 128, 128,
128, 128, 128, 128
128, 128, 128, 128,
128, 128, 0, 0
128, 128, 128, 128,
128, 128, 128, 128
N02
DWORD
300, 0 1000, 1000
300, 0 1000, 1000
300, 0 1000, 1000
300, 0 1000, 1000
500, 0 1000, 1000
500, 0 1000, 1000
N01, N02
0 128
0 128
0 128
0 128
Machine data
3.2 General machine data
-
PowerOn
ReadOnly S
ReadOnly S
ReadOnly S
ReadOnly S
1/1 M
1/1 M
K3
PowerOn
ReadOnly S
ReadOnly S
ReadOnly S
ReadOnly S
105