Overview Of The Data; Machine And Setting Data (Sinumerik); Data Identifiers - Siemens SINUMERIK 808D Parameter Manual

Explanation of machine data and setting data

2.2 Overview of the data

Data class
I (Individual)
Note:
Individual machine data are grouped in this data class,
e.g. the leadscrew error compensation values.
Depending on the contents, these are accessible via dif‐
ferent access levels.
U (User)
Access rights for protection levels 4 to 6 are only suggestions and can be altered by the machine tool manufacturer or end
1)
user.
2.2 Overview of the data

Machine and setting data (SINUMERIK)

The machine and setting data are divided into the following areas:
Range
from 200 to 9999
from 10000 to 18999
from 19000 to 19999
from 20000 to 28999
from 29000 to 29999
from 30000 to 38999
from 39000 to 39999
from 41000 to 41999
from 42000 to 42999
from 43000 to 43999

Data identifiers

The identifier specified in the data description is displayed on the HMI user interface; however,
if the data is addressed in the parts program, for example, the identifier of the relevant data
area must precede the data identifier (designator).
Identifier
$MM_
$MN_/ $SN_
$MNS_/ $SNS_
18
Write rights
Manufacturer
or
Customer
Customer
Designation
Display machine data
General NC machine data
Reserved
Channel-specific machine data
Reserved
Axis-specific machine data
Reserved
General setting data
Channel-specific setting data
Axis-specific setting data
Data area
Display machine data
General machine/setting data
Access right
Access levels 1 (password: SUNRISE)
or
Access level 3 (password: CUSTOMER)
Access level 3 (password: CUSTOMER)
Access levels 4 to 6 (key-operated switch)
1)
List Manual, 01/2017
Parameter Manual