Rcp+ Port; Service Password; Supervision Period (Sec.); Live (Video) - Bosch B9512G Program Entry Manual

42 en | Panel Wide Parameters
3.6.1

RCP+ port #

Default: 1756
Selections: 0-65535
This parameter identifies the port number the Bosch IP camera listens to for RCP+ protocol.
Only change from the default, 1756, if an IP camera has been configured to listen on a
different port.
RPS Menu Location
Panel Wide Parameters > IP Cameras > Bosch Connected Camera > RCP+ Port #
3.6.2

Service password

Default: Blank
Selections: 0, 1-32 characters
0 = Disable feature
This parameter sets the password required to access the Bosch IP camera's data. The
password is case sensitive.
RPS Menu Location
Panel Wide Parameters > IP Cameras > Bosch Connected Camera > Service Password
3.6.3

Supervision period (sec.)

Default: 0
Selections: 0, 30-255 sec
0 = Disable supervision
This parameter sets the length of time the control panel monitors a missing Bosch IP camera
before reporting the camera as missing.
RPS Menu Location
Panel Wide Parameters > IP Cameras > Bosch Connected Camera > Supervision Period
3.7

Live (video)

Products
–
–
–
Applications
Live video is best for small commercial and residential applications where conventional video
integration hardware and applications are cost prohibitive.
Implementation
This control panel communicates with Bosch IP cameras using a low-level language (RCP+).
Configure the control panels to use Bosch IP cameras as inputs, outputs, or both.
The device configuration is independent, but native.
Environment
Install control panels and Bosch IP cameras on the same network (LAN).
Panel Configuration
RSC uses the Port #, Use HTTPS?, User Name, and Password parameters to access video
images within the IP cameras.
3.7.1

Port #

Default: 80
Selections: 0-65535
2017.03 | 09 | F.01U.303.998
B9512G and B8512G with on-board IP communicator
All Bosch IP cameras
RSC (Remote Security Control)
Program Entry Guide
Control Panel
Bosch Security Systems, Inc.