Answer Armed; Answer Disarmed; Rps Phone - Bosch B9512G Program Entry Manual

Control Panel
3.14.6

Answer Armed

Default: 7
Selections: 0 to 15 (rings)
–
–
Notice!
RPS considers Part On as a disarmed state.
This parameter sets the telephone ring counter to answer when all areas are All On. If any area
in the control panel is Part On or disarmed, the Answer Disarmed, page 73 ring counter is
used.
Notice!
PSTN requirement for Australia / New Zealand, disable RPS answer armed/disarmed
If you set the Panel Wide Parameters > Phone Parameters > PSTN Compatibility parameter to
Australia or New Zealand, you must set this Answer Armed and the Answer Disarmed
parameter to 0 (disabled).
RPS Menu Location
Panel Wide Parameters > RPS Parameters > Answer Armed
3.14.7

Answer Disarmed

Default: 7
Selections: 0 to 15 (rings)
–
–
Notice!
RPS considers Part On as a disarmed state.
This parameter sets the telephone ring counter to answer when any area is in a Part On or
disarmed state.
Notice!
PSTN requirement for Australia / New Zealand, disable RPS answer armed/disarmed
If you set the Panel Wide Parameters > Phone Parameters > PSTN Compatibility parameter to
Australia or New Zealand, you must set the Answer Armed and this Answer Disarmed
parameter to 0 (disabled).
RPS Menu Location
Panel Wide Parameters > RPS Parameters > Answer Disarmed.
3.14.8

RPS Phone #

Default: Blank
Selections: Up to 24 characters
This parameter specifies the phone number the control panel dials to contact RPS.
Bosch Security Systems, Inc.
0 (zero) This setting disables answering the phone.
1 to 15 Use this setting to have the control panel answer the phone after the specified
number of rings when all areas are All On
0 (zero) - this setting disables answering the phone.
1 to 15 - use this setting to have the control panel answer the phone after the specified
number of rings when all areas are All On.
Program Entry Guide
Panel Wide Parameters | en
2017.03 | 09 | F.01U.303.998
73