Custom Functions; Custom Function Text; Custom Function Text (Second Language); Functions - Bosch B9512G Program Entry Manual

Control Panel
6

Custom Functions

Each Custom Function ### item has an 18 character programmable text. When the custom
function is assigned to the Shortcut Menu Function the user can use the PREV or NEXT key to
scroll to the Custom Function Text.
The user must have the appropriate authority level enabled for the Custom Function in the
User Configuration section, to be capable of using the custom function.
The B9512G supports 32 custom functions. The B8512G supports 8 custom functions.
6.1

Custom Function Text

Default: Function ###
Selection: Enter up to 32 characters of text, numbers and symbols.
–
–
This parameter sets the menu text displayed at the keypad for the Custom Function item.
RPS Menu Location
Custom Function > Custom Function Text
6.2

Custom Function Text (Second Language)

Default: Blank
Selections: Enter up to 32 characters of text, numbers and symbols.
This parameter sets the menu text displayed at the keypad for the Custom Function item when
the user, keypad, or system is configured to use the second language.
SDI2 keypads display the first 20 characters. If more than 20 characters are used, the text
scrolls across the display one time. To scroll the text again, press [ESC].
Spaces before, after and within a string of text are treated as text and are included in the 32
character limit.
RPS Menu Location
Custom Function > Custom Function Text (second language)
6.3

Functions

Default: Not in Use
Selections: Refer to the list below.
Use these Function parameters (Function 1 to Function 6) to assign up to six functions to a
custom function.
Double click in the Function 1 (to Function 6) field to show the function selection dialog box.
Some functions require you to configure one or two parameters. For example, if you select the
Disarm function, you select which areas to disarm in Parameter 1.
Bosch Security Systems, Inc.
SDI2 keypads display the first 20 characters. If more than 20 characters are used, the text
scrolls across the display one time. To scroll the text again, press [ESC].
Spaces before, after and within a string of text are treated as text and are included in the
32 character limit.
Program Entry Guide
Custom Functions | en 127
2017.03 | 09 | F.01U.303.998