Control Panel
Notice!
You can only configure the D1260 as address 1 to 8. You can configure the D1265 from 1-16.
RPS Menu Location
Keypads > Keypad Assignments > Keypad Type
Additional Information for fire keypads
Account is On text, page 108
Area # is On text, page 109
Area # is not Ready text, page 109
Area # is Off text, page 109
5.1.4
Area Assignment
Default: 1 (for all KP addresses)
Selections:
–
–
This parameter assigns the keypad to an area.
RPS Menu Location
Keypads > Keypad Assignments > Area Assignment
5.1.5
Keypad Language
Default: First Language, follow User language (for all KP addresses)
Selections:
–
–
–
–
This parameter sets the language that is displayed at the keypad.
RPS Menu Location
Keypads > Keypad Assignments > Keypad Language
5.1.6
Scope
Default:
–
–
Selections:
–
–
–
–
Use this parameter to define what areas are affected when this keypad is armed, what areas
can be viewed with this keypad, and what areas this keypad can move to.
Whenever the custom scope is changed, RPS shows the following warning dialog:
Bosch Security Systems, Inc.
B9512G: 1 to 32
B8512G: 1 to 8
First Language, follow User Language
First Language, ignore User Language
Second Language, follow User language
Second Language, ignore User language
Address 1: Panel Wide
All other Addresses: Area Wide
Area Wide – An area keypad is restricted to the viewing information and arming/disarming
functions for the area it is assigned to.
Account Wide – An account keypad can view information, and perform arming and
disarming functions for all areas that have the same account number. This is normally
used for an associate area.
Panel Wide – A panel wide keypad can view information and perform arming and
disarming functions for all areas in the control panel. This is normally used with a Master
area.
Custom – For a custom keypad you select the Areas in Scope.
Program Entry Guide
Keypads | en 111
2017.03 | 09 | F.01U.303.998