Bypass A Point; Unbypass A Point; Reset Sensor(S); User Command 9 - Bosch B9512G Program Entry Manual

Control Panel
Allow a user with this authority level to report User Command 7 reports if the area to which
this authority level is assigned sends User Command 7 reports.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > User Command 7
9.4.28

User Command 9

Default:
Authority Levels 1: Enabled (E)
Authority Level All others: Blank (-)
Selections:
–
–
Allow a user with this authority level to report User Command 9 reports if the area to which
this authority level is assigned sends User Command 9 reports.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > User Command 9
9.4.29

Bypass a Point

Default:
Authority Levels 1-4, 15: Enabled (E)
Authority Levels 5-14: Blank (-)
Selections:
–
–
This parameter allows the user with this authority level to bypass points.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > Bypass a Point
9.4.30

Unbypass a Point

Default:
Authority Levels 1-4, 15: Enabled (E)
Authority Levels 5-14: Blank (-)
Selections:
–
–
This parameter allows the user with this authority level to unbypass points.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > Unbypass a Point
9.4.31

Reset Sensor(s)

Default:
Authority Levels 1-4, 15: Enabled (E)
Authority Levels 5-14: Blank (-)
Bosch Security Systems, Inc.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Program Entry Guide
User Configuration | en 167
2017.03 | 09 | F.01U.303.998