View Area Status; View Event Memory; View Point Status; Walk Test (All Non-Fire Burg Points) - Bosch B9512G Program Entry Manual

Control Panel
9.4.9

View Area Status

Default:
Authority Levels 1, 2, 15: Enabled (E)
Authority Levels 3-14: Blank (-)
Selections:
–
–
This parameter allows the user with this authority level to view the current arm/disarm and
not ready to arm status of all areas within the scope of the keypad in this area. The user must
have arming/disarming authority.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > View Area Status
9.4.10

View Event Memory

Default:
Authority Levels 1-3, 15: Enabled (E)
Authority Levels 4-14: Blank (-)
Selections:
–
–
This parameter allows the user with this authority level to view all memory events that have
occurred since the last time the system was armed for all areas within the scope of the keypad
in this area.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > View Event Memory
9.4.11

View Point Status

Default:
Authority Levels 1-3, 15: Enabled (E)
Authority Levels 4-14: Blank (-)
Selections:
–
–
This parameter allows the user with this authority level to view the current status of all points
in the area to which this keypad is assigned.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > View Point Status
9.4.12

Walk Test (All Non-Fire Burg Points)

Default:
Authority Levels 1, 2, 15: Enabled (E)
Authority Levels 3-14: Blank (-)
Selections:
–
–
Bosch Security Systems, Inc.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Program Entry Guide
User Configuration | en 161
2017.03 | 09 | F.01U.303.998