Bosch B9512G Program Entry Manual page 188

188 en | Points
Example: Point Type = Part On and Point Response = 2. When the area is on (armed), a fault
on the point circuit creates a delayed alarm response.
When the area is off (disarmed), there is no response for a fault on the point circuit.
Armed Circuit
State State
Armed Open
Armed Short
Disarmed Open
Disarmed Short
Key: A = transition from normal to open changes arming state to armed, D = transition from normal to open
changes arming state to disarmed, I = instant alarm, T = trouble, blank = no response
When the point response is set to 1 and the point circuit is normal, the area is off (armed
state is disarmed). Changing the point circuit state from normal to open turns the area on
(armed state is armed). Changing the point circuit state from open to normal turns the area
off (armed state is disarmed).
When the point response is set to 2 and the point circuit is normal, the area is on (armed state
is armed). Changing the point circuit state from normal to open turns the area off (armed
state is disarmarmed). Changing the point circuit state from open to normal turns the area on
(armed state is armed).
A short on the point circuit creates a point trouble while the area is off (disarmed). A short on
the point circuit while the area is on (armed) creates an instant alarm. When the point circuit
returns to normal or open the trouble restores.
Armed Circuit
State State
Armed Open
Armed Short
Disarmed Open
Disarmed Short
Key: A = transition from normal to short to normal changes arming state to armed, D = transition from normal to
short to normal changes arming state to disarmed, I = instant alarm, T = trouble, blank = no response
The point response is fixed to 1 for the Keyswitch Momentary Point type. Changing the point
circuit state from normal to short to normal, toggles the armed state of the area. If the area is
on (armed) it is turned off (disarmed). If the area is off (disarmed) it is turned on (armed).
An open on the point circuit creates a point trouble while the area is off (disarmed). An open
on the point circuit while the area is on (armed) creates an instant alarm. When the point
circuit returns from open to normal the trouble restores.
Armed Circuit
State State
Armed Open
2017.03 | 09 | F.01U.303.998
Keyswitch Maintained Point Type, Point Response Selections
0 1 2 3 4
D
I I
A
T T
Keyswitch Momentary Point Type, Point Response Selections
0 1 2 3 4
I
D
T
A
Open/Close Point Type, Point Response Selections
0 1 2 3 4
I
5 6 7 8
5 6 7 8
5 6 7 8
Program Entry Guide
9 A B C D
9 A B C D
9 A B C D
Bosch Security Systems, Inc.
Control Panel
E F
E F
E F