View/Delete Event Memory; View Point Status; Walk Test (All Non-Fire Burg Points); Walk Test All Fire Points - Bosch B9512G Program Entry Manual

Control Panel
The armed states include:
–
–
–
–
–
All area types (Master, Associate, Regular and Shared) can be viewed using this function.
RPS Menu Location
User Configuration > User Keypad Functions > View Area Status
9.3.7

View/Delete Event Memory

Default: E
Selections: - , E, P
–
–
–
This function allows the user to view and clear event memory. Event memory is not cleared
until the area is re-armed.
RPS Menu Location
User Configuration > User Keypad Functions > View/Clear Event Memory
9.3.8

View Point Status

Default: E
Selections: - , E, P
–
–
–
This function allows the user to view point status, point text and the electrical state (normal,
open, short and missing) of each point assigned to the area.
RPS Menu Location
User Configuration > User Keypad Functions > View Point Status
9.3.9

Walk Test (all Non-Fire Burg Points)

Default: E
Selections: - , E, P
–
–
–
This function allows the user to test controlled points in areas within the keypad's scope
without sending reports to the central station.
24 hour points cannot be tested using this walk test mode.
RPS Menu Location
User Configuration > User Keypad Functions > Walk Test (All Non-Fire Burg Points)
9.3.10

Walk Test All Fire Points

Default: P
Selections: - , E, P
–
–
–
Bosch Security Systems, Inc.
Disarmed
All On delay armed
All On instant armed
Part On instant armed
Part On delay armed
Disable (-) - Disable this function panel wide regardless of the user's authority level.
Enable (E) - Enable this function panel wide without requiring a passcode.
Passcode (P) - Require a passcode to enable this function panel wide.
Disable (-) - Disable this function panel wide regardless of the user's authority level.
Enable (E) - Enable this function panel wide without requiring a passcode.
Passcode (P) - Require a passcode to enable this function panel wide.
Disable (-) - Disable this function panel wide regardless of the user's authority level.
Enable (E) - Enable this function panel wide without requiring a passcode.
Passcode (P) - Require a passcode to enable this function panel wide.
Disable (-) - Disable this function panel wide regardless of the user's authority level.
Enable (E) - Enable this function panel wide without requiring a passcode.
Passcode (P) - Require a passcode to enable this function panel wide.
Program Entry Guide
User Configuration | en 151
2017.03 | 09 | F.01U.303.998