User Group; Area Authorities - Bosch B9512G Program Entry Manual

146 en | User Configuration
When this parameter is set to Yes, the user can use the RSC (Remote Security Control)
application on their mobile device to control their security system.
When this parameter is set to No, the user is prohibited from using the RSC (Remote Security
Control) application on their mobile device to control their security system.
RPS Menu Location
User Configuration > User Assignments > Remote Access
9.1.4

User Group

Default: 0
Selections:
–
–
0 = no restrictions
This parameter creates a group of users whose combinations can be enabled/disabled using
an automatic user window. This is the number that is entered into the User Group, page 214
(Schedules > User Group Windows) for any active user window.
Multiple windows can be programmed for one user group within one 24 hour period. For
example, if User Group 1 has a window running from 8:00 AM (start time) to 4:00 PM (stop
time), the users for that group can use their passcodes only between 8:00 AM and 4:00 PM.
Between 4:00 PM and 8:00 AM the next day, the users cannot use their passcodes.
To enable this user's passcode at all times, leave this item 0.
User Group Window times cannot be changed from the keypad. Once a window is assigned to
a user group, the users in that group rely on the window to be active (within the start and
stop times) for their passcodes to function. The only way to disable the window is by
reprogramming the control panel from RPS.
Note: To expand or collapse the list of users, use the arrows at the top of the RPS screen.
RPS Menu Location
User Configuration > User Assignments (Passcodes) > User Group
9.1.5

Area Authorities

Default:
–
–
–
Selections:
–
–
Notice!
When setting up a new User, assign an authority level to the user for at least one area. The
Area Authorities parameter defaults to 0 (zero) for new users. Authority Level 0 (zero) means
the user has no authority in the area indicated. Authority level 15 is reserved for User 0-
Installer and cannot be changed.
0 = No Authority
Refer to User Configuration > Authority Levels, page 158 in RPS to view settings for each
authority level.
2017.03 | 09 | F.01U.303.998
B9512G: 0 to 32
B8512G: 0 to 8
User 0: All Area #'s Authority Level = 15
User 1:
– Area #1 Authority Level = 1
– All other Area #'s Authority Level = 0
All Other User #'s: 0
B9512G: 0 to 32
B8512G: 0 to 8
Program Entry Guide
Control Panel
Bosch Security Systems, Inc.