Opening_Closing Windows Table - Bosch B9512G Program Entry Manual

208 en | Schedules
Programming for two Opening Windows on the same day (as shown in the time line)
W#
1
2
Do not program a single window to cross the midnight boundary. The window stop time must
be later than the window start time. To program a window that effectively crosses the
midnight boundary, you have to program two windows.
For example, to program windows for an area that opens between 11:30 PM and 12:30 AM,
five days a week, use two windows as shown in the example below:
Programming to Link Two Days Over Midnight
W#
1 /
Monday
2 /
Monday
11.1.2

Opening_Closing windows table

Monday to Friday, opening between 5 and 6 AM, closing between 11 PM and 1 AM.
W#
1
2
Sunday, in between 8 and 8:30 AM, out between 2:30 and 5:00 PM.
W#
4
2017.03 | 09 | F.01U.303.998
Open
Day of Early Start
the week begin
SMTWT 06:00 07:00
FS
SMTWT 13:00 14:00
FS
Open
Early Start Stop
begin
22:00 23:30 23:59
00:00 00:00 00:30
Open
Day of Early Start
the week begin
SMTWT 04:00 05:00
FS
SMTWT
FS
Day of week
SMTWTFS
All days must be
programmed NO
Program Entry Guide
Close
Stop Early
begin
08:00
15:00
Close
Early Start Stop
begin
Close
Stop Early
begin
06:00 20:00
00:00
Open
Early begin Start
07:00 08:00
Only on holidays
Control Panel
Start Stop Except
on
Holiday
23:59 Yes / No
01:00 Yes / No
Except Holiday Area(s)
on index
Holiday
Yes / 1234 123456
No 78
Yes / 1234 123456
No 78
Start Stop Except
on
Holiday
23:00 23:59 Yes / No
00:00 01:00 Yes / No
Stop
08:30
Bosch Security Systems, Inc.