Download Print this page

Advertisement

Control Panels
B9512G/B8512G/B5512/B4512/B3512
en
Owner's Manual

Advertisement

   Summary of Contents for Bosch B9512G

  • Page 1

    Control Panels B9512G/B8512G/B5512/B4512/B3512 Owner's Manual...

  • Page 3: Table Of Contents

    Silence the alarm tone Entry delay tone and display Exit delay tone and display Keypress tones How the system reports events Alarm events Priority of events Fire alarms Gas alarms User and burglary alarms Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 4

    14.1 All On menu 14.2 Part On menu 14.3 Off menu 14.4 Extend Closing 14.5 Bypass B94x/B93x Status menu 15.1 View Area Status 15.2 View Point Status 15.3 Send Status Report 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 5: Control Panels Table Of Contents | En

    Schedule (SKEDs) 18.4 Keypad B94x/B93x Shortcuts menu B94x/B93x Events menu 20.1 View Event Memory 20.2 Clear Event Memory 20.3 View Log B92x keypad operation overview 21.1 Keys overview 21.2 Display overview Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 6

    Send Status Report B92x/B91x Actions menu 26.1 Reset 26.2 Outputs 26.3 Test 26.4 26.5 Go to Area 26.6 Firmware 26.7 Service Bypass 26.8 Access menu B92x/B91x Users menu 27.1 Change Passcode 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 7: Control Panels Table Of Contents | En

    D1255 Series keypad overview 31.3 Operation overview Options 32.1 Two-man Rule 32.2 Early Ambush 32.3 Security system limitations 32.4 Cross points 32.5 Fire safety and evacuation 32.6 Multiple area systems Glossary Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 8: Introduction

    Your property is given its own English language description that appears in the display. Contact your security company should problems be encountered during testing of the system. Your alarm company is: Call before test: ______________________________________________________ 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 9: About Documentation

    – Sections 21 through 30. Covers how to use B92x/B91x keypads. – Section 31. Covers how to use D1260x/D1255x keypads (B9512G/B8512G control panels only). – Section 32. Explains optional features and security system recommendations and limitations. Bosch Security Systems, Inc.

  • Page 10

    Text that appears in this manual in brackets [ ] instructs you to press the corresponding icon/key on your keypad. Copyright This document is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. All rights reserved. Trademarks...

  • Page 11: Keypads Overview

    Control Panels Keypads overview | en 2 Keypads overview 2.1 Identify your keypad style Take note of which keypad you own so that you can read the appropriate instructions. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 12

    A1 Lobby A1 Lobby Ready to turn on Ready to turn on PREV HELP NEXT PQRS WXYZ D1260x D1255x INSTANT DELAY RESET WATCH SPECIAL PARTIAL POLICE BYPASS COMMAND MENU PREV NEXT 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 13: Keypad Cleaning

    Use a soft cloth and non-abrasive cleaning solution to clean your keypad (for example, microfiber cloth and eyeglass cleaner). Spray the cleaner onto the cloth. Do not spray directly onto the keypad. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 14: Points

    3.2.1 Part points Part points often include the exterior doors and windows of the building (the perimeter). When you turn your system Part On, you only turn on (arm) the part points. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 15: 24-hour Points

    Non-fire 24-hour points are always on (armed) and you cannot turn them off (disarm). Panic buttons, hold up buttons, low temperature sensors, and water sensors are examples of devices that are typically monitored by non-fire 24-hour points. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 16: Areas

    With each section being its own area in your security system, you can turn them on (arm) and off (disarm) individually, in groups (office and laboratory, for example), or all together. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 17: Warning Displays And Tones

    When you enter a system that is on (armed) through a point programmed for entry delay, the keypad emits the entry delay tone as a reminder to turn off the security system. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 18: Exit Delay Tone And Display

    My exit delay time is: _______________________________ 5.5 Keypress tones The keypad sounds the keypress tone (a short beep) when you press any key. Use the Settings menu to enable/disable the keypress tone. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 19

    5.5.1 Invalid entry (error tone) The invalid entry tone follows the keypress tone when the keypress completes an invalid entry. Some entries require one keypress. Other entries require a series of two or more keypresses. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 20: How The System Reports Events

    30 to 45 seconds after a burglary alarm is triggered. Note that fire-type alarms are always reported without a delay. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 21

    If you disable call waiting after your system has been configured for it, be sure to notify your security company. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 22: Alarm Events

    The display shows the point text of the first point that went into fire alarm. Press /[NEXT] to manually show additional points (if any) that went into alarm. Events scroll from the oldest to the newest. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 23

    Some fire points need to be reset. You cannot clear fire troubles from the display. When fire points return to normal, the security system automatically clears the fire troubles from the display. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 24: Gas Alarms

    The Alarm Silenced message continues to scroll as a reminder that you can still view the text of the points in alarm by using the View Event Memory menu option. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 25: User And Burglary Alarms

    The audible alarm sounds for a specific period of time before it automatically shuts off. To silence user and burglary alarms before the time expires, simply enter your personal passcode and press [ENTER]. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 26

    | Alarm events Control Panels Notice! For silent alarms, such as hold up alarms, no audible alarm sounds. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 27: Trouble Events

    (three tones followed by a pause repeated). The system shows the number of gas points with troubles and the name for each point in trouble. 8.2.1 Silence gas troubles Press [ENTER] to silence the trouble tone. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 28: User And Burglary Trouble Events

    Service Battery Low. These displays appear on all keypads in the system. All system trouble displays begin with SERV or Service. The Service text clears only after the faulted condition is corrected. Press [ENTER] to silence the trouble tone. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 29: Cleared Events Are Not Lost

    (armed). Turning the system on (arming) clears event memory. – Select the View Log menu to view all events in your system’s event log. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 30: View Faulted Or Bypassed Points

    The keypad offers two ways of displaying faulted and bypassed point information. The first causes the faulted or bypassed point information to scroll automatically through the display. The second allows you to manually scroll through each individual point description. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 31

    Control Panels View faulted or bypassed points | en ᅳNotesᅳ Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 32: B94x Keypad Operation Overview

    | B94x Keypad operation overview Control Panels 11 B94x Keypad operation overview 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 33

    Integrated proximity reader (for use with tokens and cards) Presence sensor (lights a dim screen as you approach) Your security system provides quick access to functions through the keypad menus. My shortcuts are: ___________________________ ___________________________ ___________________________ ___________________________ Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 34: Main Display Area

    The Main icon serves as both an indicator of the arming state and alarms, and as an icon to press to change the arming state. The text above the icon provides instructions. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 35

    For example, the [View Faulted] icon allows you to look at the list of faulted points. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 36

    Yes to a keypad request. CMD (command). Press to initiate a select number of functions that require one or two additional keys. Backspace. Press to backspace to remove alphanumeric characters. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 37

    Shift. Press to enter an uppercase letter or a special character on the numbers keyboard. Backspace. Press to backspace to remove alphanumeric characters. Enter. Press to save entered characters and return to the previous menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 38: Ribbon Bar Overview

    Description Number Home. Press to return to the home (main) display. Previous. Press to return to the previous screen or menu. Next. Press to advance to the next screen or menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 39: Status Indicators Overview

    Time and Date. View the time and date. You do not interact with this area. 11.3 Status indicators overview The Status indicators on the keypad provide a quick visual reference for you to see how your system is operating. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 40

    OFF. There are no system, device, or point troubles. GAS. The blue GAS indicates a gas alarm. – Flashing. An area has a gas alarm. You should leave the premises immediately when there is a gas alarm. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 41: Feature Key

    – OFF. There is no power to the control panel. 11.4 Feature key The Feature key performs a specific function programmed by your security company. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 42: B93x Keypad Operation Overview

    Area 1 A1 Lobby Ready to turn on <Shortcuts Menu> PREV HELP NEXT PQRS WXYZ PQRS WXYZ Callout Description Number Alphanumeric display (refer to Display overview, page 46) [HELP] key Softkeys 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 43

    The keypad has a Shortcuts menu to quickly access functions you use most. Your security company programmed these Shortcuts for you. To access Shortcuts using a B93x, press [Shortcuts]. My shortcuts are: ___________________________ ___________________________ ___________________________ ___________________________ Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 44: Keys Overview

    Use the [CMD] key in combination with one or two number keys to perform functions. PREV and NEXT Use the [PREV] and [NEXT] keys to scroll through menus or menu selections. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 45

    The [HELP] key has two uses. First, use the key to open the keypad’s on-display Help. (Press [ESC] to exit Help when finished.) Also, press and hold the [HELP] key for 2 seconds to change to the security system’s second language. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 46: Display Overview

    The keypad has a bright two-line by 20-character liquid crystal display (LCD). When names are more than 18 characters, the text scrolls horizontally, similar to the way a stock ticker scrolls. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 47: Status Indicators Overview

    Trouble. The yellow caution lights when a trouble condition exists. – ON Steady. There is a system, device, or point trouble. – OFF. There are no system, device, or point troubles. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 48

    – Flashing. AC (mains) power to the control panel is not present and the control panel is operating from the battery. – OFF. There is no power to the control panel. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 49: B94x/b93x Menu Tree And Commands

    You can type the number for the desired menu, if you know it. The menu tree figure on the next page shows the Menu structure and the numbers associated for each menu (B93x only). Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 50

    <Part On Delay <Part On Instant <Part On Select Area All On menu <All On Delay <All On Instant <All On Select Area *As configured by your security company. ^B94x only. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 51

    After you press [CMD], you can use /[PREV] or [NEXT] to move through the list of commands, and press [ENTER] when viewing the desired command. Review the available commands in the following table. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 52

    Intrusion Walk Test [CMD] 4 5* Change Date and Time [CMD] 4 6* Door Control Menu [CMD] 4 7 Reset Sensors [CMD] 4 9* Change Display [CMD] 5 0 Go to Area 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 53

    [CMD] 6 Watch Mode [CMD] 7*~ Special Alert ___________________ [CMD] 8 Open Main menu [CMD] 9*~ Special Alert ___________________ *Requires firmware v3.0x or higher. B9512G/B8512G only. ~As configured by your security company. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 54: B94x/b93x On/off Menu

    When you turn the area All On, the display shows how many seconds of exit delay time remain to exit the protected area. Leave before the exit delay time expires. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 55

    6. Exit the area or enter your passcode again to stop the system from turning on. If you turn your system All On and don't exit, the system automatically switches to Part On. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 56

    4. Press to [All On Instant] open the menu. 5. Enter your passcode and press [ENTER]. The keypad shows All On. 6. To turn off the security system, enter your passcode and press [ENTER]. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 57

    4. Press [All On Select Area] to open the menu. 5. Enter your passcode and press [ENTER]. 6. Press either [On Delay] or [Instant]. The keypad responds based upon your selection. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 58: Part On Menu

    2. Press [On/Off] to open the menu. 3. Press [Part On] to open the menu. 4. Press [Part On Delay] to open the menu. 5. Enter your passcode and press [ENTER]. The keypad shows Part On Delay. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 59

    2. Press [On/Off] to open the menu. 3. Press [Part On] to open the menu. 4. Press [Part On Instant] to open the menu. 5. Enter your passcode and press [ENTER]. The keypad shows Part On Instant. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 60

    4. Press [Part On Select Area] to open the menu. 5. Enter your passcode and press [ENTER]. 6. Press either [On Delay] or [Instant]. The keypad responds based upon your selection. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 61: Off Menu

    Turning off the security system (disarm) with your passcode: 1. Enter your personal passcode. 2. Press [ENTER] within 8 sec of entering your passcode. The display returns to idle text. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 62

    2. Press [On/Off] to open the menu. 3. Press [Off] to open the menu. 4. Press [Turn Off] to turn off. 5. Enter your passcode and press [ENTER]. The display returns to idle text. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 63

    2. Press [On/Off] to open the menu. 3. Press [Off] to open the menu. 4. Press [Turn Off Select Area] to open the menu. 5. Enter your passcode and press [ENTER]. The display returns to idle text. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 64: Extend Closing

    Pressing [ESC] silences the beep and clears the message for 10 minutes. If you have not turned your system on (armed) or extended closing, the Please Close Now message and beep 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 65

    3. Press [Extend Close] to open the menu. 4. Enter your passcode and press [ENTER]. Notice! You cannot extend the window across the midnight boundary. The system cannot arm if points are off- normal. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 66: Bypass

    2. Press [On/Off] to open the menu. 3. Press [Bypass] to open the menu. 4. Press [Bypass Points] to open the menu. 5. Select a point to bypass. 6. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 67

    2. Press [On/Off] to open the menu. 3. Press [Bypass] to open the menu. 4. Press [Unbypass Points] to open the menu. 5. Select a point to unbypass. 6. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 68: B94x/b93x Status Menu

    3. Press [View Area Status] to open the menu. 4. Enter your passcode and press [ENTER]. The display shows the status of each area. For example A-1: Off. 5. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 69: View Point Status

    5. The display shows the number of points in the system. Use /[PREV] or /[NEXT] to scroll through the list of points and each point’s status. 6. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 70: Send Status Report

    2. Press [Status] to open the menu. 3. Press [Send Status Report] to open the menu. 4. Enter your passcode and press [ENTER]. The control panel sends a report to your security company. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 71: B94x/b93x Actions Menu

    Check to be certain that there is no smoke, fire, or other danger present. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 72

    | B94x/B93x Actions menu Control Panels If you cannot reset the detector or sensor, contact your security company. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 73: Outputs

    4. Enter your passcode and press [ENTER]. 5. Use /[NEXT] to select the desired output value, or use the number keys to enter the value. 6. Press [Turn On] or [Turn Off]. 7. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 74: Test

    To test individual detection devices, simply activate sensors and open protected doors and windows one-at-a-time. As you fault each detection device, the keypad from which you initiated the 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 75

    6. The keypad shows the number of points remaining to test. Press [View Untested Points]. 7. Use /[NEXT] to go through your desired point and view the status of that point. 8. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 76

    | B94x/B93x Actions menu Control Panels Automatic termination The Walk Test automatically ends after 20 minutes of no test activity. The keypad sounds during the last 5 minutes of the test. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 77

    3. Press [Test] to open the menu. 4. Press [Send Test Report] to open the menu. 5. Enter your passcode and press [ENTER]. The system sends a test report. 6. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 78

    3. Press [Test] to open the menu. 4. Press [Revisions] to open the menu. 5. Enter your passcode and press [ENTER]. The current revision information shows on the display. 6. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 79: Rps

    16.4.1 Answer Use the Answer option to answer the phone (pick up the phone line) to connect to RPS. Using the Answer menu option to answer an incoming call from RPS: Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 80

    3. Press [RPS] to open the menu. 4. Press [Answer] to open the menu. 5. Enter your passcode and press [ENTER]. The keypad shows RPS is connecting…. and then returns to idle text. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 81

    5. To use the programmed port number, press [Configured Port]. The connection progress begins. 6. If you wish to change the port number before connecting, press [Change Port]. Press [ENTER]. The connection progress begins. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 82

    2. Press [Actions] to open the menu. 3. Press [RPS] to open the menu. 4. Press [Call via Phone] to open the menu. 5. Enter your passcode, press [ENTER]. The connection progress begins. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 83: Go To Area

    3. Press [Got to Area] to open the menu. 4. Enter your passcode and press [ENTER]. 5. Use /[NEXT] to go to the area you wish to enter, and then press [Got to Area]. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 84: Firmware

    UL listed systems. Authorizing a firmware update: 1. Open the Main menu. 2. Press [Actions] to open the menu. 3. Press [Firmware] to open the menu. 4. Enter your passcode and press [ENTER]. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 85: Service Bypass

    Viewing points in Service Bypass: 1. Open the Main menu. 2. Press [Actions] to open the menu. 3. Press [Srv Bypass] to open the menu. The keypad shows any points in service bypass. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 86: Access Menu

    The door is in a failed state. Call your security company. Locked The door is locked (door can be opened by presenting a valid credential). This feature is: available on my system. unavailable on my system. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 87

    5. Enter your passcode and press [ENTER]. 6. Use [PREV] or [NEXT] to scroll to the desired door. The keypad shows the door status. 7. Press [ENTER]. The door cycles. 8. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 88

    5. Enter your passcode and press [ENTER]. 6. Use [PREV] or [NEXT] to scroll to the desired door. The keypad shows the door status. 7. Press [ENTER]. The door unlocks. 8. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 89

    5. Enter your passcode and press [ENTER]. 6. Use [PREV] or [NEXT] to scroll to the desired door. The keypad shows the door status. 7. Press [ENTER]. The door locks. 8. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 90

    5. Enter your passcode and press the [ENTER]. 6. Use [PREV] or [NEXT] to scroll to the desired door. The keypad shows the door status. 7. Press [ENTER]. The door secures. 8. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 91: B94x/b93x Users Menu

    2 of an existing passcode. For example, if 1234 is an existing code, your security system does not let you change your code to 1232, 1233, 1234, 1235, or 1236. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 92

    2. Press [Users]Press [Change Passcode] to open the menu. 3. Enter your current passcode and press [ENTER]. 4. Enter your new passcode and press [ENTER]. 5. Enter your new passcode again and press [ENTER]. 6. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 93: Add User

    The area number identifies which parts of your security system the passcode can access. Contact your security company if you don’t know what user numbers, authority levels, or areas are available. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 94

    1232, 1233, 1235, or 1236. – Choose an authority level for each area. Leaving the authority level for an area blank by pressing [ENTER] without making an entry, denies the passcode access to that area. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 95

    [CMD] before you enter the letter. For caps lock, press [CMD][CMD]. To remove caps lock, press [CMD][CMD][CMD]. 3. Press [ENTER] to save the name. The keypad returns to the previous menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 96

    5. If your security system has more than one area, use [NEXT] and the previous two steps to set the levels for the additional areas. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 97

    (for example, you accidentally added the wrong one), press [Replace] and then [Replace], and follow the previous step. 10. You can remove the added keyfob or transmitter by pressing [Remove]. 11. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 98

    3. Present the card at the card reader. The keypad shows Present card. 4. If the reader identifies the card correctly, the keypad shows Card configured. 5. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 99: Edit User

    2. Press [ENTER] to continue. 3. Enter the user’s passcode and press [ENTER]. 4. Enter the passcode again and press [ENTER]. The keypad shows Passcode changed and then returns to the previous menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 100

    5. If your security system has more than one area, use [NEXT] and the previous two steps to set the levels for the additional areas. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 101

    8. Enter the RFID. 9. Press [Save] to save the RFID and return to the previous menu. Adding or replacing a card for the user: 1. Press [Card]. 2. Press [ENTER] to continue. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 102

    Selecting a keypad display language for the user: 1. Press [Language] to select the user’s language. 2. Press [ENTER] to continue. 3. Select the desired language. The keypad shows Language configured, and then returns to the previous menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 103: Delete User

    6. Press [Continue]. 7. Press [Yes] to confirm you wish to delete the selected user. The keypad shows User ## deleted, and then returns to the previous menu. 8. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 104: B94x/b93x Settings Menu

    Use this function in residential systems to monitor entries or exits in your home. In commercial systems it can serve as a door chime to alert you when a customer or delivery person enters your business. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 105

    3. Press [Watch Mode] to open the menu. 4. Enter your passcode and press [ENTER]. 5. Press [Turn On] or [Turn Off]. The keypad indicates that you enabled or disabled Watch Mode successfully. 6. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 106: Date/time

    11. For B93x, press [AM] or [PM]. 12. Press [Save]/[ENTER] to save the change. The keypad shows Time change complete and then returns to the previous menu. 13. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 107: Schedule (skeds)

    /[NEXT] to scroll through the list of SKEDs. The keypad indicates whether a SKED is enabled, disabled, or not yet programmed. 6. Continue to Enabling a disabled SKED or Disabling a enabled SKED. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 108

    1. With the SKED you wish to disable showing, press [Disable the sked]. 2. Press [ENTER] to disable the SKED. The keypad display indicates that the SKED is disabled. 3. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 109: Keypad

    3. Press [Keypad] to open the menu. 4. Press [Brightness] to open the menu. 5. Use /[PREV] or /[NEXT] to adjust the brightness level. The changes apply immediately. 6. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 110

    3. Press [Keypad] to open the menu . 4. Press [Volume] to open the menu. 5. Use /[PREV] or /[NEXT] to adjust the volume level. The changes apply immediately. 6. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 111

    2. Press [Settings] to open the menu. 3. Press [Keypad] to open the menu. 4. Press [Keypress] to open the menu. 5. Press [Turn On] or [Turn Off]. 6. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 112

    2. Press [Settings] to open the menu. 3. Press [Keypad] to open the menu. 4. Press [Nightlight] to open the menu. 5. Press [Turn On] or [Turn Off]. 6. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 113

    2. Press [Settings] to open the menu. 3. Press [Keypad] to open the menu. 4. Press [Presence] to open the menu. 5. Press [Turn On] or [Turn Off]. 6. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 114: B94x/b93x Shortcuts Menu

    [Shortcuts]while viewing idle text. 2. Press the softkey for the desired Shortcut. If more than four Shortcuts are available, the [NEXT] key lights, and you can use the key to view additional Shortcuts. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 115: B94x/b93x Events Menu

    Viewing event memory: 1. Open the Main menu. 2. Press [Events] to open the menu. 3. Press [View Event Memory] to open the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 116: Clear Event Memory

    Clearing event memory: 1. Open the Main menu. 2. Press [Events] to open the menu. 3. Press [Clear Event Memory] to open the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 117: View Log

    To view the entire log from the newest event, press [Go to last event] without entering a start date. The date and time of the newest event shows. Use /[PREV] or /[NEXT] to move through the events. 4. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 118: B92x Keypad Operation Overview

    118 en | B92x keypad operation overview Control Panels 21 B92x keypad operation overview A1 Lobby Ready to turn on Callout Description Number Alphanumeric display (refer to Display overview, page 123) [PREV] and [NEXT] keys [ENTER] key 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 119

    Status menu). To exit a specific menu and return to the previous level, press [ESC]. To exit and return to idle text from any level of the menu structure, press and hold [ESC]. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 120

    The keypad has a Shortcuts menu to quickly access functions you use most. Your security company programmed these Shortcuts for you. To access Shortcuts, press [MENU], and then press [6]. My shortcuts are: ___________________________ ___________________________ ___________________________ ___________________________ 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 121: Keys Overview

    Part On. Use the [BYPASS] key to access the menu to bypass points. ENTER Use the [ENTER] key to complete the entry of your passcode other numbers, or to answer Yes to a keypad request. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 122

    Use the [CMD] key in combination with one or two number keys to perform functions. PREV and NEXT Use the [PREV] and [NEXT] keys to scroll through menus or menu selections. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 123: Display Overview

    The keypad uses words, numbers, and symbols to show the status of the security system. When several events occur, the keypad shows each event in order of priority. The keypad has a bright two-line liquid crystal display (LCD). Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 124: Status Indicators Overview

    Trouble. The yellow caution lights when a trouble condition exists. – ON Steady. There is a system, device, or point trouble. – OFF. There are no system, device, or point troubles. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 125

    – Flashing. AC (mains) power to the control panel is not present and the control panel is operating from the battery. – OFF. There is no power to the control panel. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 126: B91x Keypad Operation Overview

    126 en | B91x Keypad operation overview Control Panels 22 B91x Keypad operation overview A1 Lobby Ready to turn on PREV ENTER NEXT PQRS WXYZ 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 127

    Status menu). To exit a specific menu and return to the previous level, press [ESC]. To exit and return to idle text from any level of the menu structure, press and hold [ESC]. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 128: Keys Overview

    Use the [CMD] key in combination with one or two number keys to perform functions. PREV and NEXT Use the [PREV] and [NEXT] keys to scroll through menus or menu selections. ENTER 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 129: Display Overview

    The keypad has a bright two-line liquid crystal display (LCD). 22.3 Status indicators overview The Status indicators on keypads provide a quick visual reference for you to see how your system is operating. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 130

    ON Steady. There is a system, device, or point trouble. – OFF. There are no system, device, or point troubles. All On status. – Green. Ready to turn All On. – Red. All On (all armed). 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 131: B92x/b91x Menu Tree

    [ENTER] when you see the desired menu option. The menu tree figure on the next page shows the menu structure and the numbers associated for each menu option. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 132

    Press 3 to set panel time change schedule Press 4 to Press 3 to set nightlight Press 4 for show date/time keypad config *As configured by your security company. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 133

    After you press [CMD], you can use /[PREV] or [NEXT] to move through the list of commands, and press [ENTER] when viewing the desired command. Review the available commands in the following table. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 134

    Intrusion Walk Test [CMD] 4 5* Change Date and Time [CMD] 4 6* Door Control Menu [CMD] 4 7 Reset Sensors [CMD] 4 9* Change Display [CMD] 5 0 Go to Area 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 135

    [CMD] 6 Watch Mode [CMD] 7*~ Special Alert ___________________ [CMD] 8 Open Main menu [CMD] 9*~ Special Alert ___________________ *Requires firmware v3.0x or higher. B9512G/B8512G only. ~As configured by your security company. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 136: B92x/b91x On/off Menu

    Use the All On menu to turn areas All On. Turning an area All On means to turn on (arm) all the points in that area, for example, all doors and all windows and all motion sensors. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 137

    6. Exit the area or enter your passcode to stop the system from turning on. If you turn your system All On and don't exit, the system automatically switches to Part On. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 138

    4. Use [NEXT] to go to the All On Instant option, and press [ENTER], or simply press [2]. The keypad shows All On. 5. To turn off the security system, enter your passcode and press [ENTER]. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 139

    4. Use [NEXT] to go to the All On Select menu, and press [ENTER], or simply press [3]. 5. Use [NEXT] and [ENTER] to select either the On Instant or On Delay option. The keypad responds based upon your selection. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 140: Part On Menu

    [2]. 4. Press [1] or [ENTER] to open the Part On Delay option. The keypad shows Part On Dly. 5. To turn off the system, enter your passcode and press [ENTER]. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 141

    4. Use [NEXT] to go to the Part On Instant option, and press [ENTER], or press [2]. 5. Enter your passcode and press [ENTER]. The keypad shows Part On Inst. 6. To turn off the system, enter your passcode and press [ENTER]. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 142

    4. Use [NEXT] to go to the menu Part On Select menu, and press [ENTER], or press [3]. 5. Use [NEXT] and [ENTER]to select either the On Instant or On Delay option. The keypad responds based upon your selection. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 143: Off Menu

    2. Press [ENTER] within 8 sec of entering your passcode. The display returns to idle text. 24.3.1 Turn Off You can use the Turn Off menu to turn off all areas in which you have authority. Turning off areas: Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 144

    4. Use [NEXT] to go to the menu Turn Off Select menu, and press [ENTER], or simply press [2]. 5. Use [NEXT] and [ENTER] to select an area. 6. Press [ENTER] to turn off your selected area. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 145: Extend Closing

    Pressing [ESC] silences the beep and clears the message for 10 minutes. If you have not turned your system on (armed) or extended closing, the Please Close Now message and beep Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 146

    [ENTER], or simply press [4]. 4. Enter your passcode and press [ENTER]. Notice! You cannot extend the window across the midnight boundary. The system cannot arm if points are off- normal. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 147: Bypass Menu

    3. Use [NEXT] to go to the Bypass menu, and press [ENTER], or simply press [5]. 4. Press [1] or [ENTER] to open the Bypass Points menu. 5. Select a point to bypass. 6. Press [ESC] to exit the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 148

    4. Use [NEXT] to go to the Unbypass menu, and press [ENTER], or simply press [2]. 5. Enter your passcode and press [ENTER]. 6. Select a point to bypass. 7. Press [ESC] to exit the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 149: B92x/b91x Status Menu

    3. Press [1] or [ENTER] to open the View Area Status menu. 4. Enter your passcode and press [ENTER]. The display shows the status of each area. For example A1: Off. 5. Press [ESC] to exit the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 150: View Point Status

    4. The display shows the number of points in the system. Use [PREV] or [NEXT] to scroll through the list of points and each point’s status. 5. Press [ESC] to exit the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 151: Send Status Report

    3. Use [NEXT] to go to the Send Status Report menu option, and press [ENTER], or simply press [3]. 4. Enter your passcode and press [ENTER]. The control panel sends a status report to your security company. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 152: B92x/b91x Actions Menu

    Check to be certain that there is no smoke, fire, or other danger present. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 153

    Control Panels B92x/B91x Actions menu | en 153 If you cannot reset the detector or sensor, contact your security company. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 154: Outputs

    6. Press [ENTER]. The current state of the output shows. 7. Use [ENTER] to toggle between Off and On. 8. Press [ESC] to exit the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 155: Test

    To test individual detection devices, simply activate sensors and open protected doors and windows one-at-a-time. As you fault each detection device, the keypad from which you initiated the Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 156

    [ENTER], or simply press the number key for the desired walk test: [1] for Fire, [2] for Intrusion, [3] for Service, or [4] for Invisible. 7. Press [ENTER] to view the points. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 157

    9. Press [ESC] to exit the menu. Automatic termination The Walk Test automatically ends after 20 minutes of no test activity. The keypad sounds during the last 5 minutes of the test. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 158

    4. Use [NEXT] to go to the Send Test Report menu option, and press [ENTER], or simply press [2]. 5. Enter your passcode and press [ENTER]. The system sends a test report. 6. Press [ESC] to exit the menu 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 159

    4. Use [NEXT] to go to the Revisions menu option, and press [ENTER], or simply press [3]. The current control panel revision information shows on the display. 5. Press [ESC] to exit the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 160

    [ENTER], or simply press [4]. The keypad shows the first destination. 5. Use [NEXT] to go to the desired destination, and then press [ENTER]. The control panel sends a test notification, and then returns to idle text. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 161: Rps

    4. Press [1] or [ENTER] to reset the sensors with the Answer option. 5. Enter your passcode and press [ENTER]. The keypad shows RPS is connecting…. and then returns to idle text. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 162

    [NEXT] and then [ENTER], or simply press [2]. The [ESC] key acts as a backspace key. Press [ESC] to delete the characters, and then enter the new characters. Press [ENTER]. The connection process begins. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 163

    [ENTER], or simply press [4]. 4. Use [NEXT] to go to the Call Via Phone menu option, and press [ENTER], or simply press [3]. 5. Enter your passcode and press [ENTER]. The connection process begins. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 164: Go To Area

    3. Use [NEXT] to go to the Go to Area menu option, and press [ENTER], or simply press [5]. 4. Enter your passcode and press [ENTER]. 5. Use [NEXT] to go to the area you wish to enter, and then press [ENTER]. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 165: Firmware

    2. Use [NEXT] to go to the Actions menu option, and press [ENTER], or simply press [3]. 3. Use [NEXT] to go to the Firmware menu option, and [ENTER], or simply press [6]. 4. Enter your passcode and press [ENTER]. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 166: Service Bypass

    3. Use [NEXT] to go to the Service Bypass menu option, and press [ENTER], or simply press [6]. 4. Enter your passcode and press [ENTER]. The keypad shows any points in service bypass. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 167: Access Menu

    The door is in a failed state. Call your security company. Locked The door is locked (door can be opened by presenting a valid credential). This feature is: available on my system. unavailable on my system. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 168

    6. Use [PREV] or [NEXT] to scroll to the desired door. The keypad shows the door status. 7. To cycle the door, press [ENTER]. The door cycles. 8. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 169

    5. Enter your passcode and press [ENTER]. 6. Use [PREV] or [NEXT] to scroll to the desired door. The keypad shows the door status. 7. Press [ENTER]. The door unlocks. 8. Escape from the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 170

    5. Enter your passcode and press [ENTER]. 6. Use [PREV] or [NEXT] to scroll to the desired door. The keypad shows the door status. 7. Press [ENTER]. The door locks. 8. Escape from the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 171

    5. Enter your passcode and press [ENTER]. 6. Use [PREV] or [NEXT] to scroll to the desired door. The keypad shows the door status. 7. Press [ENTER]. The door secures. 8. Escape from the menu.. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 172: B92x/b91x Users Menu

    2 of an existing passcode. For example, if 1234 is an existing code, your security system does not let you change your code to 1232, 1233, 1234, 1235, or 1236. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 173

    5. Enter your new passcode and press [ENTER]. 6. Enter your new passcode again and press [ENTER]. The keypad shows Passcode changed and then returns to the Change Passcode option. 7. Press [ESC] to exit the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 174: Add User

    The area number identifies which parts of your security system the passcode can access. Contact your security company if you don’t know what user numbers, authority levels, or areas are available. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 175

    1232, 1233, 1235, or 1236. – Choose an authority level for each area. Leaving the authority level for an area blank by pressing [ENTER] without making an entry, denies the passcode access to that area. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 176

    2. Press [ENTER] to configure the user’s passcode. 3. Enter the user’s passcode and press [ENTER]. 4. Enter the passcode again and press [ENTER]. The keypad shows Passcode changed and then returns to the previous menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 177

    4. If your security system has more than one area, use [NEXT] and the previous two steps to set the levels for the additional areas. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 178

    (for example, you accidentally added the wrong one), use [NEXT] to go to the Replace a Keyfob option, and press [ENTER],or simply press [3], and then follow the previous step. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 179

    3. Present the card at the reader. 4. If the reader identifies the card, the keypad shows Card configured. 5. Press [ESC] to exit the menu. This feature is: available on my system. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 180

    180 en | B92x/B91x Users menu Control Panels unavailable on my system. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 181: Edit User

    Passcode changed and then returns to the previous menu. Configuring the user’s name: 1. Use [NEXT] to go to the Configure Name option, and press [ENTER], or simply press [2]. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 182

    4. If your security system has more than one area, use [NEXT] and the previous two steps to set the levels for the additional areas. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 183

    (for example, you accidentally added the wrong one), use [NEXT] to go to the Replace a Keyfob option, and press [ENTER],or simply press [3], and then follow the previous step. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 184

    3. Present the card at the card reader. 4. If the reader identifies the card, the keypad shows Card configured. 5. Press [ESC] to exit the menu. This feature is: available on my system. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 185

    Control Panels B92x/B91x Users menu | en 185 unavailable on my system. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 186: Delete User

    7. Press [ENTER] to confirm you wish to delete the selected user. The keypad shows User ## deleted, and then returns to the previous menu. 8. Press [ESC] to exit the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 187: B92x/b91x Settings Menu

    Use this function in residential systems to monitor entries or exits in your home. In commercial systems it can serve as a door chime to alert you when a customer or delivery person enters your business. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 188

    5. Press [ENTER] to turn Watch Mode on if it is off, or off if it is on. The keypad display indicates that you enabled or disabled Watch Mode successfully. 6. Press [ESC] to exit the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 189: Date/time

    9. Enter the new time in HH:MM format. If you make a mistake, the [ESC] key acts as a backspace key. Press [ESC] to delete the characters and then enter the new numbers. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 190

    11. Press [ENTER] to select AM, or press [NEXT] and then [ENTER] to select PM. The keypad shows Change complete and then returns to the previous menu. 12. Press [ESC] to exit the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 191: Schedule (skeds)

    SKED is enabled, disabled, or not yet programmed. 6. With the SKED you wish to enable showing, press [ENTER]. 7. Continue to Enabling a disabled SKED or Disabling a enabled SKED. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 192

    1. With the SKED you wish to enable showing, press [ENTER]. 2. Press [ENTER].to continue disable it. The keypad display indicates that the SKED is disabled. 3. Press [ESC] to exit the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 193: Keypad

    [ENTER], or simply press [4]. 4. Press [1] or [ENTER] to adjust the brightness. 5. Press [PREV] or [NEXT] to adjust the brightness level. The changes apply immediately. 6. Press [ESC] to exit the menu. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 194

    4. Use [NEXT] to go to the Volume menu option, and press [ENTER], or simply press [2]. 5. Press [PREV] or [NEXT] to adjust the volume level. The changes apply immediately. 6. Press [ESC] to exit the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 195

    3. Use [NEXT] to go to the Press 4 for Keypad Config option, or simply press [4]. 4. Use [NEXT] to go to the Press 4 to Set Nightlight option, or simply press [4]. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 196

    5. Use [PREV] or [NEXT] to toggle between the Yes and No options. 6. Press [ENTER] while viewing the desired option to save the programming. 7. Press [ESC] to exit the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 197: B92x/b91x Shortcuts Menu

    2. Use [NEXT] to go to the Shortcuts menu option, and press [ENTER], or simply press [6]. 3. Use [PREV] or [NEXT] to go to the Shortcut you wish to run, and then press [ENTER]. The shortcut runs. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 198: B92x/b91x Events Menu

    1. Open the Main menu. 2. Use [NEXT] to go to the Events menu option, and press [ENTER], or simply press [7]. 3. Press [1] or [ENTER] to open the view event memory. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 199: Clear Event Memory

    2. Use [NEXT] to go to the Events menu option, and press [ENTER], or simply press [7]. 3. Use [NEXT] to go to the Clear Event Memory menu option, and press [ENTER], or simply press [2]. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 200: View Log

    Use [PREV] or [NEXT] to move through the events. If an event description is longer than the display, the event description scrolls horizontally. 4. Press [ESC] to exit the menu. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 201: D1260/d1255 Keypads

    Control Panels D1260/D1255 keypads | en 201 31 D1260/D1255 keypads Only the B9512G/B8512G control panels support the D1260 and D1255 Series keypads. 31.1 D1260 Series keypad overview Area 1 A1 Lobby Ready to turn on <Shortcuts Menu> Bosch Security Systems, Inc.

  • Page 202

    202 en | D1260/D1255 keypads Control Panels Callout Description Number Alphanumeric display Softkeys [ENTER] [CMD] key (Command) 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 203: D1255 Series Keypad Overview

    Control Panels D1260/D1255 keypads | en 203 31.2 D1255 Series keypad overview INSTANT DELAY RESET WATCH SPECIAL PARTIAL POLICE BYPASS COMMAND MENU PREV NEXT Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 204: Operation Overview

    For D1255 Series keypads, refer to the menu tree in B92x/B91x menu tree, page 131. To enter a command, press the [CMD] key and then the one or two digit command. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 205

    [CMD] 2 Part On, Part On menu, Part On menu, Instant page 58 page 140 [CMD] 3 Part On (with delay) [CMD] 4 7 Reset Reset, page 71 Reset, page 152 Sensors Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 206

    Watch Mode, page Mode Notice! On these models of keypad, [CMD] 5 6 only adds the user and passcode; it does not support configuring user name, authority level, keyfob, and tokens, and cards. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 207: Options

    1. Enter the first passcode and press [ENTER]. The keypad shows a request for the second passcode. 2. Enter a second passcode and press [ENTER]. The second passcode must be different from the first passcode. The area turns off. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 208: Early Ambush

    You can enter the passcodes at the same keypad, or at different keypads (if keypads are assigned to the same area). Early Ambush is: enabled on my system. disabled on my system. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 209

    3. Enter a second passcode and press [ENTER]. The keypad shows Code 2 Validated to confirm that the security system accepted the second passcode and stopped the Early Ambush time countdown. The system does not create a duress event. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 210: Security System Limitations

    Smoke detectors might not be able to warn in time about fires started by explosions, improper storage of flammables, overloaded electrical circuits, or other types of hazardous conditions. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 211

    Although having a security system might make you eligible for reduced insurance premiums, the security system is no substitute for insurance. Warning devices cannot compensate you for loss of life or property. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 212: Cross Points

    A second alarm on the first point does not create an alarm event, but rather an unverified event. Cross points are: enabled on my system. disabled on my system. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 213: Fire Safety And Evacuation

    – Practice using different ways out. – Teach children how to escape on their own in case you can’t help them. – Close doors behind you as you leave. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 214

    If you have to escape through smoke, get low and go under the smoke to your way out. – Call the fire department from outside your home. Kitchen Dining Room Bedroom Family Room Living Room Bedroom Bedroom Meeting Place 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 215: Multiple Area Systems

    Example Your security system protects a business configured for three areas (the office, the warehouse, and shipping), and three users (1, 2, and 3). Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 216

    What does this mean for the three users in the example? Specifically, which areas turn on when the user turns the system All On from each keypad? 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 217

    None User’s authority is limited to passcode- the office area, which is not protected within the warehouse functions? keypad’s scope Result of turning the system All On? No area turns on. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 218

    User’s authority is limited to passcode- the office area, which is not protected within the warehouse or functions? shipping keypad’s scope Result of turning the system All On? No area turns on. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 219

    Perform Warehouse User’s authority includes the passcode- warehouse which is in the protected keypad’s scope functions? Result of turning the system All On? Only the warehouse area turns on. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 220

    User’s authority level and passcode- and shipping the keypad’s scope include protected both the warehouse and functions? shipping Result of turning the system All On? Only the warehouse and shipping areas turn on. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 221

    Perform Warehouse User’s authority includes the passcode- warehouse which is in the protected keypad’s scope functions? Result of turning the system All On? Only the warehouse area turns on. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 222

    User’s authority level and passcode- and shipping the keypad’s scope include protected both the warehouse and functions? shipping Result of turning the system All On? Only the warehouse and shipping areas turn on. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 223: Glossary

    A programmed delay of system begins an alarm system alarm response response which may allowing an individual to include reports to the enter an armed area central station. Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371...

  • Page 224

    Part On An arming command that arms only the perimeter points. 2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

  • Page 228

    Bosch Security Systems, Inc. Bosch Sicherheitssysteme GmbH 130 Perinton Parkway Robert-Bosch-Ring 5 Fairport, NY 14450 85630 Grasbrunn Germany www.boschsecurity.com © Bosch Security Systems, Inc., 2015...

This manual also for:

B5512, B8512g, B4512, B3512

Comments to this Manuals

Symbols: 0
Latest comments: