226 en | Access
12
Access
12.1
Door #
12.1.1
Door Name Text
Default: DOOR#
Selections: Up to 32 alphanumeric characters
Notice!
The B9512G supports Doors 1 to 32 on an SDI2 bus, or Doors 1 to 8 on an SDI bus. The
B8512G supports Doors 1 to 8.
Enter up to 24 characters of text to describe the door.
This is for informational purposes only and is not programmed in the control panel.
Enter up to 24 characters of text to describe the door.
This is for informational purposes only and is not programmed in the control panel.
RPS Menu Location
Access > Doors > Door Name Text
12.1.2
Door Name Text (second language)
Default: blank
Selections: Up to 32 alphanumeric characters
Notice!
The B9512G supports Doors 1 to 32 on an SDI2 bus, or Doors 1 to 8 on an SDI bus. The
B8512G supports Doors 1 to 8.
Enter up to 24 characters of text to describe the door.
This is for informational purposes only and is not programmed in the control panel.
RPS Menu Location
Access > Doors > Door Name Text (second language)
12.1.3
Door Source
Default: Disabled
Selections:
–
–
–
Use this parameter to assign each door to a device type.
Notice!
You can configure only doors 1 to 8 as SDI (D9210C / B901). The B901 emulates a D9210C
when connected to the SDI Bus.
The D9210C supports cards / credentials for users 1 to 1000 only.
RPS Menu Location
Access > Doors > Door Source
12.1.4
Entry Area
Default: 1
2017.03 | 09 | F.01U.303.998
Disabled. Door module is disabled.
SDI (D9210/B901)
SDI2. (B901)
Program Entry Guide
Control Panel
Bosch Security Systems, Inc.