Camera Name; Camera Name (Second Language); Url Or Ip Address; Bosch Connected Cameras - Bosch B9512G Program Entry Manual

Control Panel
3.5.1

Camera name

Default: Camera #
Selections: 0-32 characters
This parameter allows the user to enter a description for a Bosch IP camera. Enter up to 32
characters of text, numbers, and symbols.
RPS Menu Location
Panel Wide Parameters > IP Cameras > Camera Name
3.5.2

Camera name (second language)

Default: Blank
Selections: Enter up to 32 characters.
This parameter allows the user to enter a description for a Bosch IP camera. Enter up to 32
characters from the Latin-1 8-bit (ISO/IEC 8859-1) character set to describe the area.
First and Second languages are programmed during panel account setup in the Panel Data -
View window. Refer to Panel Data - View > Panel Info tab > Additional Info.
Language options are: English, Spanish, French and Portuguese.
RPS Menu Location
Panel Wide Parameters > IP Cameras > Camera Name (second language)
3.5.3

URL or IP address

Default: Blank
Selections: 0-128 ASCII characters
This parameter sets the URL or IP address for the Bosch IP camera.
The control panel or RSC application uses the URL or IP address to communicate with the
camera over a network.
RPS Menu Location
Panel Wide Parameters > IP Cameras > URL or IP Address
3.6

Bosch Connected Cameras

Products
–
–
Applications
Bosch IP cameras are best for small commercial and residential applications where
conventional video integration hardware and applications are cost prohibitive.
Implementation
This control panel communicates with Bosch IP cameras using a low-level language (RCP+).
Configure compatible control panels to use Bosch IP cameras as inputs, outputs, or both.
Environment
Install compatible control panels and Bosch IP cameras on the same network (LAN).
Panel Configuration
Configure the control panel with each camera's IP address. RCP+ port #, Service password,
and Supervision period (sec) parameters configure network communication and supervision
with connected Bosch IP cameras.
Other panel configuration for using IP cameras
New Point Source option "IP Camera" (ref. Points > Point Assignments > Source)
New Output Source option "IP Camera" (ref. Output Parameters > Output Configuration >
Output Source)
Bosch Security Systems, Inc.
B9512G and B8512G with on-board IP communicator
All Bosch IP cameras
Program Entry Guide
Panel Wide Parameters | en
2017.03 | 09 | F.01U.303.998
41