90
en | Panel Wide Parameters
3.19.3
Email server authentication/encryption
Default: Authenticate
Selections:
–
–
–
Use this parameter to set the security level required by the email server to receive messages
from the control panel.
Authentication means that the email server requires an authentication user name and
authentication password. This is sometimes referred to as SMTP-AUTH.
The Encryption used is Secure Sockets Layer (SSL) / Transport Layer Security (TLS)
RPS Menu Location
Panel Wide Parameters > Personal Notification > Email Server Configuration > Email Server
Authentication/Encryption
3.19.4
Authentication user name
Default: Blank
Selections: Blank, 1 to 255 characters
This parameter specifies the user name for the email account that is set up to receive
messages from the SMTP server sent by the control panel.
RPS Menu Location
Panel Wide Parameters > Personal Notification > Email Server Configuration > Authentication
User Name
3.19.5
Authentication password
Default: Blank
Selections: Blank, 1 to 49 characters
This parameter sets the password that the SMTP server uses to send emails to the Personal
Notification destinations.
RPS Menu Location
Panel Wide Parameters > Personal Notification > Email Server Configuration > Authentication
Password
2017.03 | 09 | F.01U.303.998
Basic - no authentication, no encryption
Authenticate - authentication required, no encryption
Encrypted - authentication required, encryption required
Program Entry Guide
Control Panel
Bosch Security Systems, Inc.