Table of Contents
Advertisement
D8024/D10024A
Network Options
Network Option
Panel network-
address number
Quantity of slave
processors
Slave CPU 1 is at
network address
Slave CPU 2 is at
network address
Etc.
Use modem
Share zones
Peer-to-Peer
*Port B Protocol
System events
* Port B Protocol is not available on D8024 panels.
13.2
Port B Protocols
•
The Port B serial interface supports a number of different protocols.
•
These can be used to define the connections as:
-
Standard RADIONICS Panel Network
-
Pager Interface
-
Other PC System Interface
•
The following table defines the settings to be entered for each interface type.
Network Option
Panel Network
Pager A
(Fire Zone nnn)
Pager B
(Fire Zone nnn + 40 character zone and sensor location.)
Two way PC Interface
(Gives Troubles and Alarms with acknowledgment.)
One way PC Interface
(Gives Troubles and Alarms.)
50616B
Option setting
1..20
1..20
1..20
1..20
[TRUE]/[FALSE]
[TRUE ]
[TRUE]
0
[GLOBAL]/[LOCAL ]
Table 15: Master Panel Network Settings
Table 16: Port B Protocol Settings
D8024/D10024A Operation and Installation Guide
Page 48
Comments
Enter Master's own address, i.e. 4.
Number of slaves DIRECTLY connected to the Master, i.e.
via port C.
The address of the first slave panel.
The address of the second slave panel.
MUST be set to FALSE
Zones are shared between panels
Allow TROUBLE SILENCE, ALARM SILENCE and RESET
key presses from a slave panel.
Use default of 0 unless special applications interface.
Global -
passes system events over network
accepts other network events
Local -
does not pass events over the network.
ignores other network events
NOTE: The zonal fire status is passed over a shared-
zone network regardless of events being global or
local.
Protocol Option
Comments
setting
0
Default setting.
20
21
30
31
© 2002 Radionics
Advertisement
Table of Contents
