Force Arm; Send Area Open/Close; Restricted Open/Close - Bosch B9512G Program Entry Manual

170 en | User Configuration
Notice!
The user authority to execute a Custom Function automatically grants the user authority to
execute all commands within the programmed Custom Function. If a user does not have
authority to do a specific command through the keypad menu, then it does not prohibit them
from using the same command through a Custom Function.
RPS Menu Location
B9512: User Configuration > Authority Levels > Custom Function 128 (to 159)
B8512: User Configuration > Authority Levels > Custom Function 128 (to 135)
B6512: User Configuration > Authority Levels > Custom Function 128 (to 133)
B5512: User Configuration > Authority Levels > Custom Function 128 (to 131)
B4512: User Configuration > Authority Levels > Custom Function 128 (and 129)
B3512: User Configuration > Authority Levels > Custom Function 128
9.4.38

Force Arm

Default:
Authority Levels 1-6: Enabled (E)
Authority Levels 7-15: Blank (-)
Selections:
–
–
Allow a user with this authority level to force arm the control panel.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > Force Arm
9.4.39

Send Area Open/Close

Default:
Authority Level 1-14: Enabled (E)
Authority Level 15: Blank (-)
Selections:
–
–
Allow a user with this authority level to generate opening and closing reports if the area to
which this authority level is assigned sends opening and closing reports.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > Send Area Opening/Closings
9.4.40

Restricted Open/Close

Default: Blank (-) for all authority levels
Selections:
–
–
Allow a user with this authority level to initiate an opening report if a bell is ringing or a
closing report when force/bypass arming. The area to which this authoritylevel is assigned
must be programmed for restricted openings and closings (Refer to Restricted O/C, page 105).
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
2017.03 | 09 | F.01U.303.998
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Blank (-): This function is not authorized for the user who is assigned this authority level.
Enabled (E): This function is authorized for the user who is assigned this authority level.
Program Entry Guide
Control Panel
Bosch Security Systems, Inc.