Keypad Volume; Keypad Brightness; Disable Presence Sensor; Disable Token Reader - Bosch B9512G Program Entry Manual

Control Panel
Users with authority to change the keypad display can select whether or not the keypad
displays the date and time.
RPS Menu Location
Keypads > Keypad Assignments > Show Date and Time
Additional Information
Change Keypad Display, page 165
5.1.27

Keypad Volume

Default: 7 (for all KP addresses)
Selections: 0 to 7
–
–
This parameter sets the volume level for the keypress acknowledgement tone on the keypad.
Adjusting the keypad volume in this parameter does not affect the volume of high priority
tones such as alarms which always sound at maximum volume.
RPS Menu Location
Keypads > Keypad Assignments > Keypad Volume
5.1.28

Keypad Brightness

Default: 6
Selections: 0 to 6
0 - Lowest setting
1 to 6 - increases or decreases keypad display brightness. The higher the number, the brighter
the display.
This parameter sets the brightness for the LED display on the keypad. Keypad brightness can
also be set at the keypad.
RPS Menu Location
Keypads > Keypad Assignments > Keypad Brightness
5.1.29

Disable Presence Sensor

Default: No
Selections:
–
–
This parameter enables or disables the Presence Sensor on the keypad.
When enabled, the Presence Sensor detects motion within close proximity to the keypad and
brightens a dimmed display as a user approaches.
Available for the B94x Touch screen keypads.
RPS Menu Location
Keypads > Keypad Assignments > Disable Presence Sensor
5.1.30

Disable Token Reader

Default: Yes
Selections:
–
–
This parameter enables or disables the Credential Reader on the keypad.
Bosch Security Systems, Inc.
0 - the minimum volume setting.
1 to 7 - increases or decreases keypress volume. The higher the number, the louder the
tone.
Yes - disable Presence Sensor
No - enable Presence Sensor
Yes - disable Token Reader.
No - enable Token Reader.
Program Entry Guide
Keypads | en 119
2017.03 | 09 | F.01U.303.998