140 en | Output Parameters
Notice!
To ensure proper operation, do not assign more than one function to the output associated
with this summary function.
Notice!
Fire/gas trouble points must be restored to normal before summary outputs can be cleared.
RPS Menu Location
Output Parameters > Panel Wide Outputs > Summary Fire Trouble
8.2.9
Summary Supervisory Fire
Default: 0
Selections:
–
–
This output activates when any fire supervisory point on the control panel is in a supervisory
event (off normal). A steady output is provided until all fire supervisory points are restored to
a normal condition and the event message is cleared by the user at the keypad.
Notice!
To ensure proper operation, do not assign more than one function to the output associated
with this summary function.
Notice!
Fire/gas trouble points must be restored to normal before summary outputs can be cleared.
RPS Menu Location
Output Parameters > Panel Wide Outputs > Summary Supervisory Fire
8.2.10
Summary Trouble
Default: 0
Selections:
–
–
This parameter output activates when any non-fire/gas point on the control panel is in a
trouble condition. A steady output is provided until the event message is cleared by the user
at the keypad.
Notice!
To ensure proper operation, do not assign more than one function to the output associated
with this summary function.
Notice!
Fire/gas trouble points must be restored to normal before summary outputs can be cleared.
2017.03 | 09 | F.01U.303.998
B9512G: 0 to 599
B8512G: 0 to 99
B9512G: 0 to 599
B8512G: 0 to 99
Program Entry Guide
Control Panel
Bosch Security Systems, Inc.