Point Profile Descriptions; 24-Hour; Part On - Bosch B9512G Program Entry Manual

Control Panel
This parameter sets the Normal state for the point index.
When this parameter is set to Open, an open circuit on the point sensor loop is the Normal
state.
When this parameter is set to Short, a shorted circuit on the point sensor loop is the Normal
state.
RPS Menu Location
Points > Point Profile (Point Index) > Point Type/Response/Circuit Style
10.4

Point Profile descriptions

10.4.1

24-Hour

A 24-hour point is not turned on and off from a keypad. 24-hour points are armed all the time,
and can be used for panic, medical, and police alerts.
24-hour points can be programmed as bypassable. However, the application should be
carefully considered before using the bypassable option. Bypassable 24-hour points should be
programmed to Buzz on Fault, page 193.
When a 24-hour point is bypassed, the report should be sent as it occurs. If the area contains
all 24-hour points, the area is never armed or disarmed; therefore, a deferred bypass report is
not sent.
24-hour protection for fire doors, roof hatches, etc. Instead of programming this type of
protection as a 24-hour point, consider using a perimeter point type with a Point Response,
page 184 of 9 to E. 24-hour points do not show faults when an arming function is entered, but
perimeter points do. When programming for this type of protection, you should consider using
the Buzz On Fault and Local While Disarmed, page 194 options.
Hold-up devices in UL installations: the 24-Hour point type must be used for points connected
to hold-up devices. The point text must include, "hold-up".
10.4.2

Part On

Configuring a point profile with the Part On point type makes it a Part On point profile. Points
assigned to a Part On point profile are Point On points. Part On points are typically used to
monitor devices in the perimeter of the premises (doors and windows).
A Part On point profile includes a configurable entry delay time. Entry delay time provides time
for users to reach a keypad and turn the area Off without creating an alarm event. For
example, when a user opens the front door (tripping a Part On point) entry delay time begins.
The user needs to proceed to a keypad and turn the area off before exit delay time expires to
prevent an alarm event.
If the area is in entry delay and a second Part On point trips, the control panel compares the
remaining entry delay time to the entry delay time programmed for the second Part On point.
If the second point's entry delay time is less than the remaining time, it shortens the entry
delay time.
Notice!
Part On Points with instant Point Response create immediate alarm events
Perimeter Points programmed for an instant Point Response, page 184 do not start entry delay
time when tripped. They generate an alarm event immediately, even during entry or exit delay.
When a user turns an area All On; Part On points, Interior points, and Interior Follower points
are all armed.
Bosch Security Systems, Inc. Program Entry Guide
Points | en 203
2017.03 | 09 | F.01U.303.998