Site Code; Card Data; Inovonics Keyfob Rfid (B820) - Bosch B9512G Program Entry Manual

Control Panel
Note: To expand or collapse the list of users, use the arrows at the top of the RPS screen.
RPS Menu Location
User Configuration > User Assignments > Area Authorities
9.1.6

Site Code

Default (per card type):
26 bit card type: 255
37 bit no site code card type: blank
37 bit with site code card type: 65535
Selections (per card type):
26 bit card type: 0 to 254, 255 = disabled
37 bit no site code card type: blank
37 bit with site code card type: 0 to 65534, 65535 = disabled
For the 37 bit no site code card type the site code is not configurable (the Site Code
parameter is grayed out).
For 26 bit and 37 bit with site code card types, enter the site code (facility code) as shown on
the packaging of the cards or tokens. You can also retrieve the site code using RPS. First add
the card or token into the system at the premises using a reader and keypad (MENU 42). Then
connect to the panel with RPS and receive the panel account.
When you delete a card (or delete the card data) RPS automatically sets the Site Code to the
default (255 for 26 bit card type, 65535 for 37 bit with site code card type).
RPS Menu Location
User Configuration > User Assignments > Site Code
9.1.7

Card Data

Default: blank
Selections:
26 bit card type: 0 to 65534, blank
37 bit no site code card type: 0 to 1099511627774, blank
37 bit with site code card type: 0 to 524286, blank
Enter the card data printed on the card or token.
For the 26 bit and 37 bit with site code Card Type, page 235s, you must enter the Site Code,
page 147 before you enter Card Data.
Notice!
You can configure only doors 1 to 8 as SDI (D9210C / B901). The B901 emulates a D9210C
when connected to the SDI Bus.
The D9210C supports cards / credentials for users 1 to 1000 only.
RPS Menu Location
User Configuration > User Assignments > Card Data
9.1.8

Inovonics Keyfob RFID (B820)

Default: N/A
Selections: 0 - 99999999
Each user can be assigned a wireless keyfob RFID (Radio Frequency device Identification
number). An Inovonics keyfob RFID can be Auto-Learned through the SDI2 bus RF receiver, or
it can be entered here.
Auto-Learned RFIDs can be edited for Inovonics keyfob replacement, or can be set to 0 to
disable a user's Inovonics keyfob. An RFID is a unique number assigned to a wireless device at
the factory. It provides a unique way for the wireless receiver and wireless repeaters to
Bosch Security Systems, Inc. Program Entry Guide
User Configuration | en 147
2017.03 | 09 | F.01U.303.998