Load And Save; Show Loadsave Files; Show Loadsave Tftp - Siemens SCALANCE XM-400 Configuration Manual

Configuration

3.2 Load and Save

3.2 Load and Save
This section describes commands for displaying, copying, saving and downloading files for
the device.
Note
Please note: During the installation of a previous version, the configuration data can be lost.
In this case, the device starts up with the factory configuration settings after the firmware has
been installed.
3.2.1

show loadsave files

Description
This command shows the current Load&Save file information.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show loadsave files
Result
The current Load&Save file information is displayed.
3.2.2

show loadsave tftp

Description
This command shows the current Load&Save TFTP server configuration.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
80
or
cli#
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07