No Ip Name Server - Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.1 IPv4 protocol
The parameters have the following meaning:
Parameter
ipv4
ip-address
index
id
Result
The IP address and, if specified, the index for a DNS server has been set.
7.1.11.14

no ip name server

Description
This command deletes the entry with the specified index for a DNS server. If you do not
specify an index, all entries are deleted.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no ip name-server [index <id1-3>]
The parameters have the following meaning:
Parameter
index
id
Result
The specified entries for the DNS servers were deleted.
248
Description
Keyword for IPv4
IP address of the DNS server
Keyword for the index
Index of the DNS server
Description
Keyword for the index
Index of the DNS server
Range of values
-
Format 0.0.0.0
-
1 ... 3
Range of values
-
1 ... 3
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07