No Snmp Notify - Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.4 SNMP
7.4.2.11

no snmp notify

Description
With this command, you delete the details of the SNMP notifications.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp notify <NotifyName>
The parameters have the following meaning:
Parameters
NotifyName
Result
The details of the SNMP notifications are deleted.
Further notes
You change the details of an SNMP group with the
You display the configured SNMP notifications with the
You display the configured SNMP target addresses with the
command.
284
Description
Name of the notification
Configuration Manual, 05/2014, C79000-G8976-C252-07
Range of values
max. 32 characters
command.
snmp notify
show snmp notif
show snmp targetaddr
SCALANCE XM-400/XR-500 Command Line Interface
command.