Network protocols
7.4 SNMP
Further notes
You delete the details of an SNMP community with the
You show the details of an SNMP community with the
You show the status information of the SNMP communication with the
7.4.2.7
no snmp community index
Description
With this command, you delete the details of an SNMP community.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp community index <CommunityIndex>
The parameters have the following meaning:
Parameter
CommunityIndex
Result
The details of an SNMP community are deleted.
Further notes
You configure the details of an SNMP community with the
You show the details of an SNMP community with the
You show the status information of the SNMP communication with the
280
Description
Name of the community
Configuration Manual, 05/2014, C79000-G8976-C252-07
no snmp community index
show snmp community
show snmp
Range of values
max. 32 characters
snmp community index
show snmp community
show snmp
SCALANCE XM-400/XR-500 Command Line Interface
command.
command.
command.
command.
command.
command.