No Ip Rip Send Version - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Layer 3 functions

no ip rip send version

This command specifies that there is no restriction relating to the version of outgoing RIP

updates. Updates according to RIPv1 and RIPv2 are sent.

You are in the VLAN configuration mode of the VLAN interface with the ID $$$ or in the

configuration mode for a router port.

The command prompt is as follows:

cli(config-if-vlan-$$$)#

cli(config-if-RPort-%%$$$)#

where %% is a short name for the interface type and $$$ is the numbering of the interface.

Call the command without parameters:

no ip rip send version

All RIP updates are sent.

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

Scalance xr-500