Web-Session-Timeout - Siemens SCALANCE XM-400 Configuration Manual

Functions specific to SCALANCE
4.2 WBM
4.2.2.1

web-session-timeout

Description
With this command, you enable the automatic logoff and you configure the timeout setting for
the WBM.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
web-session-timeout[seconds(60-3600)]
The parameter has the following meaning:
Parameter
seconds
Result
The time is configured and automatic logout is enabled.
Further notes
You disable automatic logoff with the
You display the current timeout setting with the
110
Description
Time in seconds until automatic logoff after the last entry
no web-session-timeout
command.
show web-session-timeout
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Range of values
60 ... 3600
Default: 900
command.