Configuration Limits - Siemens SCALANCE XM-400 Configuration Manual

General information

2.3 Configuration limits

2.3 Configuration limits
Configuration limits of the device
The following table lists the configuration limits for Web Based Management and the
Command Line Interpreter of the device.
The usability of various functions depends on the device type you are using and whether or
not a KEY-PLUG is inserted.
System
Layer 2
Security IP addresses from a RADIUS server
26
Configurable function
Syslog server
E-mail server
SNMPv1 trap recipient
Virtual LANs (port-based; including VLAN 1)
Protocol-based VLAN groups per port
IPv4 subnet-based VLANs
Multiple Spanning Tree instances
Link aggregations or Etherchannels each with a maximum of 8
ports per aggregation
Ports in a link aggregation
Static MAC addresses in the forward database (FDB)
Multicast addresses without active GMRP
Multicast addresses with active GMRP
VLANs whose data traffic can be mirrored to a monitor port
Management ACLs (access rules for management)
Rules for port ACL MAC
Ingress and egress rules for port ACL MAC
Rules for port ACL IP
Ingress and egress rules for port ACL IP
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Maximum number
3
3
10
257
12
150
16
8
8
256
512
50
255
3
10
128
256
128
256