Security and authentication
11.7 Port Based Network Access Control
11.7.5.3
dot1x guest-vlan vlan-id
Description
With this command, you configure a guest VLAN for a port.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
dot1x guest-vlan vlan-id <vlan-id (1 - 4096)
The parameters have the following meaning:
Parameter
vlan
-
Result
The guest VLAN ID is assigned to the port.
11.7.5.4
no dot1x guest-vlan vlan-id
Description
With this command, the guest VLAN ID is reset to the default value 1.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no dot1x guest-vlan vlan-id
532
Description
Keyword for the VLAN ID
VLAN ID
Configuration Manual, 05/2014, C79000-G8976-C252-07
Range of values
-
1 - 4096
SCALANCE XM-400/XR-500 Command Line Interface