● If you exit the Plug Configuration mode with the
● If you exit the Plug Configuration mode with the
4.1.3.1
factoryclean
Description
With this command, you delete the device configuration stored on the C-PLUG or KEY-
PLUG.
Requirement
● There is a device configuration on the C-PLUG or KEY-PLUG.
You are in the Plug Configuration mode.
The command prompt is as follows:
cli(config-plug)#
Syntax
Call the command without parameters:
factoryclean
Result
The device configuration on the C-PLUG or KEY-PLUG is deleted.
4.1.3.2
write
Description
With this command, you format the C-PLUG or KEY-PLUG and copy the current device
configuration to it.
Requirement
● The C-PLUG or KEY-PLUG is formatted.
You are in the Plug Configuration mode.
The command prompt is as follows:
cli(config-plug)#
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Configuration mode.
Privileged EXEC mode.
Functions specific to SCALANCE
command, you return to the Global
exit
command, you return to the
end
4.1 C-PLUG
107