Layer 2 management protocols
8.1 GARP
8.1.3.2
no gmrp
Description
With this command, you disable the GMRP function for all interfaces on the device.
Requirement
You are in the Global Configuration mode
or
You are in the Interface Configuration mode
The command prompt is as follows:
cli(config)#
cli (config-if-$$$) #
Syntax
Call the command without parameters:
no gmrp
Result
In the Global Configuration mode: The GMRP function is disabled on the device.
In the Interface Configuration mode: The GMRP function is disabled for this interface.
Further notes
If you want to enable the function for a specific interface on the device, use the
command.
You can display the status of this function and other information with the
info
318
command.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
gmrp
show vlan device