Diagnostics
12.2 Syslog client
12.2
Syslog client
With the commands in this section, the following settings are configured:
● Transfer of the messages to the log server
● Local buffering and storage of messages
● Receipt and forwarding of messages from other devices (relay mode)
12.2.1
show events syslogserver
Description
This command shows the entries of the configured log server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events syslogserver
Result
The entries of the configured log server are displayed.
12.2.2
Commands in the Events configuration mode
This section describes commands that you can call up in the EVENTS configuration mode.
In the Global configuration mode, enter the
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
● If you exit the EVENTS configuration mode with the
Global configuration mode.
● If you exit the EVENTS configuration mode with the
Privileged EXEC mode.
568
or
cli#
command to change to this mode.
events
command, you return to the
exit
command, you return to the
end
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07