Network protocols
7.4 SNMP
7.4.2.5
no snmp access
Description
With this command, you delete the access to an SNMP group.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp access <GroupName>{v1|v2c|v3{auth|noauth|priv}}
The parameters have the following meaning:
Parameters
GroupName
-
-
Result
The access to an SNMP group is deleted.
Further notes
You configure the setting with the
You display the configured SNMP groups with the
You display the access configurations for SNMP groups with the
command.
You display the configured SNMP tree views with the
278
Description
Name of the group to which access is deleted
Selects the version of the protocol used
Selects the authentication method:
snmp access
command.
command.
show snmp group
show snmp group access
show snmp viewtree
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Values
max. 32
characters
•
v1
•
v2c
•
v3
•
auth
•
noauth
•
priv
command.