Show Spanning-Tree Active; Show Spanning-Tree Bridge - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Further notes

You display the general settings for the Spanning Tree Protocol with the

show spanning-tree active

This command shows the settings for the active ports of the spanning tree function.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call up the command with the following parameters:

show spanning-tree active [detail]

The parameter has the following meaning:

The settings for the active ports of the spanning tree function are displayed.

This command shows the settings of the spanning tree function of the bridge.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

Shows settings in detail

Network structures

6.3 Spanning Tree

show spanning-tree

Scalance xr-500