Compatible Rfc1583 - Siemens SCALANCE XM-400 Configuration Manual

Further notes
You create virtual links with the
You display information about the virtual link with the
9.3.13.11

compatible rfc1583

Description
With this command, you enable compatibility with RFC 1583. Use the command if you still
have old OSPFv2 routers in operation that are not compatible with RFC 2328.
Note
This command is available only with layer 3.
Requirement
You are in the OSPF Router configuration mode.
The command prompt is as follows:
cli(config-ospf)#
Syntax
Call the command without parameters:
compatible rfc1583
Result
The compatibility with RFC 1583 is enabled.
Further notes
You disable the compatibility with the
You can display the status of this function and other information with the
ospf
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
command.
command.
area virtual link
show ip ospf virtual
no compatible rfc1583
Layer 3 functions
9.3 OSPFv2
command.
command.
show ip
383