No Arp - Siemens SCALANCE XM-400 Configuration Manual

Result
The entry is generated in the ARP cache.
Further notes
You delete a static entry from the ARP cache with the
You can display the status of this function and other information with the
arp
You configure the router port with the
7.8.2.2

no arp

Description
With this command, you delete an entry from the ARP cache.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no arp <ip address>
The parameter has the following meaning:
Parameters
ip address
For information on addresses and interfaces, refer to the section "Addresses and interface
names (Page 30)".
Result
The entry is deleted.
Further notes
You generate a static entry in the ARP cache with the
You can display the status of this function and other information with the
arp
You configure the router port with the
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
command.
Description
Value of the IP address whose entry will be deleted
command.
no arp
command.
no switchport
command.
arp
command.
no switchport
Network protocols
command.
show ip
Range of values
IP address or IP alias
show ip
7.8 ARP
309