Configuration
3.1 System
3.1.11.5
negotiation
Description
With this command, you enable autonegotiation of connection parameters on an interface.
Requirement
You are in the interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
negotiation
Result
The function is enabled.
Further notes
You disable the autonegotiation of connection parameters with the
command.
3.1.11.6
no negotiation
Description
With this command, you disable autonegotiation of connection parameters on an interface.
Requirement
You are in the interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no negotiation
70
no negotiation
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07