6.1.2.5
protocol-vlan
Description
With this command, you enable the protocol-based classification on all interfaces.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
protocol-vlan
Result
The classification is enabled.
Further notes
You disable the setting with the
You can display the status of this function and other information with the
info
6.1.2.6
no protocol-vlan
Description
With this command, you disable the protocol-based classification on all interfaces.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no protocol-vlan
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
command.
command.
protocol-vlan
Network structures
6.1 VLAN
show vlan device
153